Supplemental Information
101
N300 WiFi Cable Modem Router Model C3000
Factory Default Settings
You can return the modem router to its factory default settings.
To restore the factory default settings:
1. Locate the small hole in the bottom of the modem router.
The Reset button is located inside this hole.
2. Use a paperclip or sharp object to press and hold the Reset button for over seven seconds.
Designed by NETGEAR in California
The modem router resets and returns to the factory configuration settings shown in the
following table.
Factory Default Settings
Gateway login User login URL http://192.168.0.1
User name and password
(case-sensitive)
admin / password
Local network
(LAN)
LAN IP 192.168.0.1
Subnet mask 255.255.255.0
DHCP server Enabled
DHCP starting IP address 192.168.0.2
DHCP ending IP address 192.168.0.254
Firewall Inbound communication from the
Internet
Disabled (except traffic on port 80, the HTTP port)
Outbound communication to the
Internet
Enabled (all)
Source MAC filtering Disabled
Internet
connection
WAN MAC address Use default hardware address