Vista RJ-45 Network Ports with Built-in LEDs
The front panel of the Model DS104 hub provides four vista RJ-45 network ports (six on the Model DS106 hub, eight on the Model DS108 hub, 16 on the Model DS116 hub). These standard RJ-45 connectors accept two-pair or four- pair Category 5 unshielded twisted pair (UTP) copper wiring (only two pairs are used). The RJ-45 connector uses an 8-pin interface. Two LEDs are positioned at the top corners of each RJ-45 connector. The left indicator is the 100 Mbps Link/Receive LED, and the right indicator is the 10 Mbps Link/Receive LED. The illustration shows the Model DS116 Link/Receive LEDs. The LEDs for the Model DS104, Model DS106, and Model DS108 hubs are identical. The table that follows describes the LEDs for all three models.
vista RJ-45
network ports
8152FB
LED Status | Description |
| |
On | Link (Good Connection) |
| |
Blinking | RX (Receive Data) |
| |
Rear Panel
The rear panels of the DS100 Series hubs are identical. Each has a ground clip and a receptacle for the power adapter.
Rear Panel of the Model DS104, Model DS106,
Model DS108, and Model DS116 Hub
5 Vdc 800 mA
Ground clip | Power |
| receptacle |
9092FB
Model DS104/DS106/DS108/DS116 Dual Speed Hub Installation Guide
