January 26, 2007
This symbol was placed in accordance with the European Union Directive
2002/96 on the Waste Electrical and Electronic Equipment (the WEEE
Directive). If disposed of within the European Union, this product should be
treated and recycled in accordance with the laws of your jurisdiction
implementing the WEEE Directive.
© 2006 by NETGEAR, Inc. All rights reserved. NETGEAR is a registered trademark of NETGEAR, Inc. in the
United States and/or other countries. Other brand and product names are trademarks or registered trademarks of
their respective holders. Information is subject to change without notice.
Configuring Your Media Library
Use the Configuration Wizard to set up your
media library to work with the Digital Entertainer
HD. Follow these steps:
1. Click Next to begin.
The Configuration Wizard prompts you to
select media folders to be shared. This will
allow the Digital Entertainer HD to access
these files.
2. Browse and select the folders that you want,
and then click Next.
The Configuration Wizard is ready to configure your Digital Entertainer HD and
displays this screen:
3. For some firewalls, specific ports must be opened so that the Digital Entertainer HD
can access media files on your computer. If prompted, select Allow or Unblock to
allow the access.
4. Click Next, and follow the onscreen instructions to select your media folders.
5. When you are finished, go to your TV.
Your Digital Entertainer HD is ready to use. The Main Menu is displayed. For
information about using the Digital Entertainer HD, see the NETGEAR Digital
Entertainer HD Model EVA8000 User Manual.
Safety Information
Please read and follow this important information, especially those instructions related to
the risk of electric shock or injury to persons.
Warning : To reduce the risk of electric shock, do not remove the cover. There
are no user serviceable parts inside.
Warning : This device can display static images, which can cause “burn in” of
certain displays. Avoid leaving static images (such as photos or
paused videos) onscreen for long periods of time.
Warning : There are no user serviceable fuses. To avoid fire hazard, use only
the specified fuse(s) with the correct type number, voltage, and
current ratings as referenced in the service instructions or on the
equipment. Fuses should be replaced only by qualified service
personnel.
Warning : This device should be used only indoors in well-ventilated areas.
To reduce the risk of fire, electric shock, or interference, do not
expose this appliance to moisture or rain and use only the
recommended accessories.
Technical Support
Thank you for selecting NETGEAR products. After completing the installation, register
your product at http://www.NETGEAR.com/register. For product updates and Web support
go to http://kbserver.netgear.com/products.