Introduction, Installation Overview | NETGEAR FS608 v2, FS605 v2

Statement of Conditions

In the interest of improving internal design, operational function, and/or reliability, NETGEAR reserves the right to make changes to the product described in this document without notice.

NETGEAR does not assume any liability that may occur due to the use or application of the product(s) or circuit layout(s) described herein.

Certificate of the Manufacturer/Importer

It is hereby certified that the NETGEAR Model FS605 v2/FS608 v2 Fast Ethernet Switch has been suppressed in accordance with the conditions set out in the BMPT-AmtsblVfg 243/1991 and Vfg 46/1992. The operation of some equipment (for example, test transmitters) in accordance with the regulations may, however, be subject to certain restrictions. Please refer to the notes in the operating instructions.

Federal Office for Telecommunications Approvals has been notified of the placing of this equipment on the market and has been granted the right to test the series for compliance with the regulations.

Federal Communications Commission (FCC) Compliance Notice: Radio Frequency Notice

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

•This device may not cause harmful interference.

•This device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•Consult the dealer or an experienced radio/TV technician for help.

EN 55 022 Declaration of Conformance

This is to certify that the NETGEAR Model FS605 v2/FS608 v2 Fast Ethernet Switch is shielded against the generation of radio interference in accordance with the application of Council Directive 89/336/EEC, Article 4a. Conformity is declared by the application of EN 55 022 Class B (CISPR 22).

Canadian Department of Communications Radio Interference Regulations

This digital apparatus (NETGEAR Model FS605 v2/FS608 v2 Fast Ethernet Switch) does not exceed the Class B limits for radio-noise emissions from digital apparatus as set out in the Radio Interference Regulations of the Canadian Department of Communications.

Règlement sur le brouillage radioélectrique du ministère des Communications

Cet appareil numérique (NETGEAR Model FS605 v2/FS608 v2 Fast Ethernet Switch) respecte les limites de bruits radioélectriques visant les appareils numériques de classe B prescrites dans le Règlement sur le brouillage radioélectrique du ministère des Communications du Canada.

Introduction

The NETGEAR® 5/8-Port Fast Ethernet Switch Model FS605 v2/FS608 v2 provides you with a low-cost, reliable, high-performance switch to connect up to five or eight different Ethernet- enabled devices (such as computers, file servers, print servers, printers, routers and hubs).

Fast Ethernet Switch FS605 v2/FS608 v2

You use the FS605 v2/FS608 v2 switch to build a small network that enables you to have 10 Mbps or 100 Mbps access to other devices on the network. Also, with this switch, you can add extra computers to your cable or DSL router. Unlike a hub that shares its connection with all devices, the FS605 v2/FS608 v2 switch provides a full, dedicated 100 Mbps (or 10 Mbps) connection between two devices. If a device has full-duplex capability, the FS605 v2/FS608 v2 switch provides a 200 Mbps (or 20 Mbps) connection.

Ethernet cables come as either straight-through or crossover cables—depending on whether you’re connecting to a device (computer, server, or printer) or networking equipment (hub, switch, or router). With the Auto Uplink™ feature, you don’t have to worry about which one you use. Each port on the FS605 v2/FS608 v2 switch automatically configures itself correctly when you plug in a device’s cable.

If you have a problem with your switch, NETGEAR offers free support 24 hours a day and 7 days a week on the Web (www.NETGEAR.com), by e-mail (support@NETGEAR.com) and by phone (see the provided support information card for phone numbers).

Installation Overview

Estimated Time: 5–10 minutes

1.Unpack the box and verify the contents.

2.Prepare to install the switch.

3.Install the switch and connect the other devices.

FS608 v2, FS605 v2 specifications

The NETGEAR FS605 v2 and FS608 v2 are reliable and efficient switches designed to meet the growing demands of small to medium-sized networks. These devices are part of NETGEAR's series of easy-to-use networking solutions, aimed at providing seamless connectivity and robust performance for home offices, businesses, and educational institutions.

The FS605 v2 is a 5-port Fast Ethernet switch, while the FS608 v2 offers 8 ports, providing flexibility depending on the size of the network. Both models support 10/100 Mbps speeds, allowing for efficient data transfer and network management. This is crucial for environments where multiple devices require a stable connection, such as computers, printers, and IP cameras.

One of the standout features of the FS605 v2 and FS608 v2 is their plug-and-play installation. Users can simply connect their devices using standard Ethernet cables, and the switches will automatically configure themselves, minimizing setup time and technical knowledge required. This user-friendly approach makes these switches ideal for individuals and organizations looking to enhance their network infrastructure without the need for specialized IT expertise.

The switches also come equipped with auto-MDI/MDI-X technology, enabling each port to automatically detect the type of connected device and adjust accordingly. This eliminates the need for crossover cables, simplifying the networking process further and ensuring compatibility with a wide range of hardware.

In terms of performance, the FS605 v2 and FS608 v2 feature store-and-forward switching architecture, which helps to prevent packet collisions and ensure smooth data flow across the network. With the ability to support multiple simultaneous data streams, these switches are well-suited for applications requiring high bandwidth and low latency.

Power efficiency is another key characteristic, as both switches are designed to consume less power compared to traditional networking devices. This focus on energy efficiency not only reduces operational costs but also aligns with environmentally friendly practices.

In summary, NETGEAR's FS605 v2 and FS608 v2 switches offer robust performance, ease of use, and energy efficiency, making them ideal for businesses and home offices looking to maximize their networking capabilities. With features like plug-and-play installation, auto-MDI/MDI-X, and store-and-forward architecture, these switches effectively meet the demands of today's connectivity needs while maintaining a simple and effective user experience.

NETGEAR FS608 v2, FS605 v2 manual Introduction, Installation Overview

Models: FS608 v2 FS605 v2