ProSafe® Dual WAN VPN Firewall with 8-port 10/100 Switch FVX538

Technical Specifications

System Requirements•
Cable, DSL or wireless broadband –
modem and Internet service
Ethernet connectivity from –
broadband modem
Network card for each connected PC –
Network software (e.g. Windows) –
Internet Explorer 5.0 or higher or –
Netscape Navigator 4.7 or higher
MAC, Linux
Physical Interfaces•
LAN ports: Eight (8) 10/100 Mbps –
auto-sensing, Auto Uplink™ RJ-45
ports; one (1) Gigabit 10/100/1000
Mbps LAN port; one LAN port can be
dedicated hardware DMZ port
WAN ports: Two 10/100 Mbps Ethernet –
RJ-45 ports with auto fail-over and
load balancing
Serial port: One console port for –
command line interface (CLI) support
Security Features•
SPI firewall: Stateful packet inspection –
(SPI) to prevent notorious denialof-
service (DoS) attacks, including
logging, reporting and email alerts,
address, service and protocol, Web
URL keyword filtering, prevent replay
attack (reassembly attack), port/service
blocking. Advanced features include
block Java/URL/ ActiveX based on
extension, FTP/SMTP/RPC
program filtering
SIP Application Layer Gateway –
SIP compatibility list: –
Linksys SPA-901 –
Linksys SPA-941 –
SNOM M3 –
Cisco 7940G –
X-Lite 3.0 (software for phones) –
D-Link DPH-140S –
Grandstream GXP-2000 –
Polycom SoundStation 6000 –
Siemens C450 –
Aastra 51i –
VPN functionality: Two hundred (200) –
dedicated VPN tunnels, Manual key
and Internet Key Exchange Security
Association (IKE SA) assignment
with pre-shared key and RSA/DSA
signatures, key life and IKE lifetime
time settings, perfect forward secrecy
(Diffie-Hellman groups 1 and 2 and
Oakley support), operating modes
(main, aggressive), fully qualified
domain name (FQDN) support for
dynamic IP address VPN connections.
IPsec support: IPsec-based 56-bit –
(DES), 168-bit (3DES), or 256-bit
(AES) encryption algorithm, MD5 or
SHA-1 hashing algorithm, AH/AH-ESP
support, PKI features with X.509 v.3
certificate support, remote access VPN
(client-to-site), site-to-site VPN, IPsec
NAT traversal (VPN pass-through)
Mode of Operation: One-to-one/ –
many-to-one Multi-network Address
Translation (NAT), classical routing,
unrestricted users per port
IP Address Assignment: Static IP –
address assignment, internal DHCP
server on LAN, DHCP client on WAN,
PPPoE client support
Performance Features•
Throughput: –
- LAN-to-WAN: up to 80 Mbp
- 3DES IPsec tunnel: Up to 30 Mbps
Management Features•
Administration interface: SNMP (v1b, –
v2c) support, telnet, web graphic user
interface, Secure Sockets Layer (SSL)
remote management, user name and
password protected; secure remote
management support authenticated
through IP address or IP address range
and password; configuration changes/
upgrades through Web GUI.
Configuration and upgrades: Upload –
and download configuration settings,
firmware upgradeable flash memory
Logging: SYSLOG, email alerts –
Two-factor authentication support for –
administrator interface
Functions•
VPN Wizard to simplify configuration of –
the VPN, auto detect to automatically
detect ISP address type (static, dynamic,
PPPoE), port range forwarding, port
triggering, exposed host (DMZ),
hardware DMZ, enable/disable WAN
ping, DNS proxy, MAC address cloning/
spoofing, Network Time Protocol NTP
support, keyword content filtering,
email alerts, DHCP server (info and
display table), PPPoE login client
support, WAN DHCP client, diagnostic
tools (ping, trace route, other), port/
service, Auto Uplink on switch ports
and Quality of Service (QoS), SIP ALG
Protocol Support•
Network: IP routing, TCP/IP, UDP, –
ICMP, PPPoE
IP addressing: DHCP (client and server) –
Routing: RIP v1, RIPv2 (static routing, –
dynamic routing)
VPN/security: IPsec (ESP, AH), MD5, –
SHA-1, DES, 3DES, IKE, PKI, AES
Maintenance•
Save/restore configuration, restore –
defaults, upgrades via Web browser,
display statistics, logging,
SYSLOG support
Hardware Specifications•
Processor: 533 MHz Intel XScale IXP425 –
Memory: 32 MB flash, 64 MB DRAM –
Encryption accelerator: Cavium –
Processor up to 60+ Mbps
(3DES+SHA-1) encryption
Power requirements: 100-240V AC, –
50-60 Hz, 15W Max
Dimensions: 33 x 20.3 x 4.4 cm –
(13 x 8 x 1.75 in)
Weight: 2.01 kg (4.42 lb) –
Environmental Specifications•
Operating temperature: 0º to 40º C –
(32º to 104º F)
Operating humidity: 90% maximum –
relative humidity, non-condensing

Warranty

Switch: NETGEAR Lifetime Warranty – †
Power supply: NETGEAR 3-year Warranty –