Manuals / Brands / Computer Equipment / Switch / NETGEAR / Computer Equipment / Switch

NETGEAR GS700TP, 724TP, GS724TPS-100NAS, GS748TP-100NAS GS748TP Front and Back Panels Configuration

1 36

Download 36 pages, 664.46 Kb

GS700TP Hardware Installation Guide

Physical Description 3-20

v1.0, November 2007

• System LEDs

Figure 3-2 illustrates the NETGEAR GS724TP Smart Switch back panel:

The back panel contains the following:

• A 100-240VAC/50-60 Hz universal input, which is a standard AC power receptacle for

accommodating the supplied power cord.

GS748TP Front and Back Panels Configuration

The GS748TP is a 48-Port 10/100/1000M Smart PoE switch + 4 SFP Combo port switch. Every

RJ45 port is capable of sensing the line speed and negotiating the operation duplex mode with the

link partner automatically

Figure 3-3 illustrates the NETGEAR GS748TP Smart Switch front panel:

The front panel contains the following:

• 48 RJ-45 connectors for 10/100/1000Mbps auto sensing Gigabit Ethernet switching ports.

• Four SFP slots for SFP modules supporting 1000(1000Base-SX/LX)/100M SFP.

• Reset button to restart the device.

• Recessed default reset button to restore the device back to the factory defaults.

• Port LEDS

• System LEDs

Figure 3-2

Figure 3-3

Contents

Main ii v1.0, November 2007 Technical Support Trademarks Statement of Conditions Certificate of the Manufacturer/Importer Besttigung des Herstellers/Importeurs Voluntary Control Council for Interference (VCCI) Statement Regulatory Compliance Information Europe EU Declaration of Conformity FCC Requirements for Operation in the United States FCC Information to User Canadian Department of Communications Radio Interference Regulations GS700TP Smart Switch with Gigabit Ports Product and Publication Details Contents Page About This Guide Conventions, Formats and Scope How to Use This Manual How to Print this Manual Revision History Chapter 1 Introduction Overview Page Switch Features Page Package Contents Page Chapter 2 Installation Step 1: Preparing the Site Step 2: Installing the Switch Installing the Switch on a Flat Surface Installing the Switch in a Rack Step 3: Checking the Installation Step 4: Connecting Devices to the Switch Step 5: Installing an SFP GBIC Module Step 6: Applying AC Power Step 7: Managing the Switch through a Web Browser or the PC Utility for Initial Configuration Chapter 3 Physical Description Front and Back Panel Configuration GS724TP Front and Back Panels Configuration GS748TP Front and Back Panels Configuration LED Designations Port LEDs GS700TP Hardware Installation Guide Physical Description 3-22 System LEDs The following table describes the system LED designations. Table3-2. System LEDs Table3-1. Port LEDs (continued) Device Hardware Interfaces RJ-45 Ports SFP GBIC Module Factory Defaults Button A-1 Appendix A Troubleshooting Troubleshooting Chart The following table lists symptoms, causes, and solutions of possible problems. TableA-1. Troubleshooting Chart Additional Troubleshooting Suggestions Network Adapter Cards Configuration Switch Integrity Page Appendix B Technical Specifications Page Page Index-1 Index Numerics A B C I L M N O