NETGEAR STM300EW-100NAS Configuring the E-mail Notification Server

ProSecure Web/Email Security Threat Management (STM) Appliance Reference Manual
6-2 Monitoring System Access and Performance
v1.0, September 2009
Configuring the E-mail Notification Server
If you have used the Setup Wizard, you might have already configured the e-mail notification
server; the E-mail Notification Server screen allows you to modify these settings.
The STM can automatically send information such as notifications and reports to an administrator .
You must configure the necessary information for sending e mail, such as the administrator’s
e-mail address, the e-mail server, us er name, and password.
To configure the e-mail notification server:
1. Select Global Settings > Email Notification Server from the menu. The Email Notification
Server screen displays (Figure 6-1 contains some examples).
2. Complete the fields, select the radio button and checkboxes, and make your selections from
the pull-down menus as explained in Table 6-1.
Figure 6-1
Table 6-1. E-mail Notification Settings
Setting Description (or Subfield and Description)
Show as Mail sender A descriptive name of the sender for e-mail identification purposes. For
example, enter stm600notification@netgear.com.
Send Notifications to The e-mail address to which the notifications should be sent. Typically, this is
the e-mail address of a user with administrative privileges.