c.Shortly after registration Ace will send you an email confirming your service has been activated.
TROUBLESHOOTING
If you have no dial tone, check the following:
•Make sure the phone is plugged into the correct port on the Voice Adapter (line #1).
•Make sure that you have an active broadband Internet connection by accessing a web page and checking your email.
•Ensure that you have set up an account with Ace Communications Group and that you have received an email confirming that the account is active.
TECHNICAL SUPPORT
For detailed technical assistance please refer to the User Manual for the TA612V available at http://www.acecommunications.com.au/ta612v.
INSTALLATION GUIDETA612VVOICEADAPTER
MINIMUM SYSTEM REQUIREMENTS
Before installing the NETGEAR TA612V Broadband Voice Adapter, please make sure that your computer system has the following:
•Broadband Internet connection
Note: If you have a broadband connection that requires PPPoE and you wish to use the TA612V as a router, refer to the User Manual for the TA612V available at http://www.acecommunications.com.au/ta612v.
•Standard (Analogue) telephone
INSTALLATION WHEN USING TA612V AS A ROUTER & VOICE ADAPTER
This guide shows you how to set up your Broadband Voice Adapter as a Router when connecting it to a switch or single PC.
1.SET-UP THE NETWORK CONNECTIONS
a.Unplug the power cable for your modem. Make sure that you have turned your computer off and that you DO NOT plug in the TA612V voice adapter until instructed to do so.
b.Connect your broadband modem into the Internet Port on the TA612V.
c.Connect the Ethernet cable we provide into the Ethernet port on the TA612V. Connect the other end of this Ethernet cable into the Ethernet port on the PC or spare port on your switch.
d.Connect a telephone to the TA612V Line 1 port.
e.Power on the modem. Wait about two minutes for it to start up.
2.THEN, INSTALL THE TA612V VOICE ADAPTER
a.Plug the power cable into the TA612V Power port, and plug the other end into an electrical outlet. This turns on your TA612V Broadband Voice Adapter. You do not need to unplug it when not in use.
