NETGEAR 108 Mpbs Wireless USB 2.0 Adapter WG111T User Manual
1-3
v2.0, February 2007
What Is in the BoxThe product package should contain the following items:
• NETGEAR 108 Mbps Wireless USB 2.0 Adapter WG111T
• Installation Guide for the NETGEAR 108 Mbps Wireless USB 2.0 Adapter WG111T
• NETGEAR CD, including:
– Driver and Configuration Utility Software
–NETGEAR 108 Mpbs Wireless USB 2.0 Adapter WG111T User Manual (this document)
– Animated Network Properties Configuration Tutorial
– PC Networking Tutorial
• Warranty and Support information card
If any of the parts are incorrect, missing, or damaged, contact your NETGEAR dealer. Keep the
carton, including the original packing materials, in case you need to return the product for repair.
WG111T Default Wireless SettingsIf this is a new wireless network installation, use the factory default settings to set up the network
and verify wireless connectivity. If this is an addition to an existing wireless network, you will
need to identify the wireless network and wireless security settings that are already defined.
Your NETGEAR 108 Mbps Wireless USB 2.0 Adapter WG111T factory default basic settings are:
• Network Name Service Set Identification (SSID): Any (First available network)
• Network Mode (Infrastructure or Ad-hoc): Infrastructure
• Data security WEP, WPA2-PSK, or WPA-PSK encryption: Disabled
The section below provides instructions for setting up the NETGEAR 108 Mbps Wireless USB 2.0
Adapter WG111T for basic wireless connectivity to an access point. The procedures below provide
step-by-step installation instructions for Windows PCs. Use the procedure that corresponds to the
version of Windows that you are using.
Note: In order for the WG111 108 Mbps Wireless USB 2.0 Adapter to communicate
with a wireless access point or wireless adapter, all devices must be set up to
use the same wireless network name (SSID).