NETGEAR WNR834B Configuring Static Routes

NETGEAR RangeMax™ NEXT Wireless Router WNR834B User Manual

4-8 Customizing Your Network Settings

v2.1, July 2007

The normal MTU value for most Ethernet networks is 1500 bytes, 1492 bytes for PPPoE

connections, or 1450 for PPTP connections. For some ISPs, you may need to reduce the MTU, but

this is rarely required and should not be done unless you are sure it is necessary for your ISP

connection. For more information, see “Changing the MTU” on page5-20.

To change the MTU size:

1. Under MTU Size, enter a new size between 64 and 1500.

2. Click Apply to save the new configuration.

Configuring Static Routes

Static routes provide additional routing information to your router. Under normal circumstances,

the router has adequate routing information after it has been configured for Internet access, and

you do not need to configure additional static routes. You must configure static routes only for

unusual cases such as multiple routers or multiple IP subnets located on your network.

From the main menu of the browser interface, under Advanced, click Static Routes to view the

Static Routes menu.

To add or edit a static route:

Figure 4-4