NTI UNIMUX SERIES USB KVM SWITCH

13

User Login Mode

User login mode requires a user to login with a user name and password from the list created by the administrator. This mode will
also disable use of the front panel until the user logs in.
Function: Keystroke:
Adds a character to the
user name/password
Removes previous character
from the user name/password
Submit user name/password
Exit USER LOGIN and return
to previous mode. This function
is only available if security is
not currently active.

Figure 10- User Login screen

ADDITIONAL MODES AVAILABLE WITH SECURITY

The three modes that follow are only available if the administrator is logged in.

Administration Mode

To enter the Administration Mode menu press <A> from the
Maintenance Mode menu (page 22).
Administration Mode allows the administrator to use the
following functions:
Function: Keystroke:
Change the administrator’s
password
Disable security
Update User Name List

Figure 11- Administration Mode menu

Selects the idle time in minutes
Change Alternate Command (See page 15 for details)
Hot Key
Exit Administration Mode and
return to previous mode
Esc
Enter
A-Z
0-9 (Type any alphabetical or numeric characte r)
Backspace
If the password submitted is incorrect, the user will not be able to proceed.
If the password submitted is correct, the user will proceed to Normal Mode.
Esc
SCUT--(xxx from 000 to 255. i.e. T002
would set the time-out period
for 2 minutes. 000 will disable it)
-
(0-2)
x (0-9)
x (0-9)
x
X