Microcode Update
A26361-D1761-Z120-1-6319 English - 25
► Close the casing as described in the operating manual.
► Remove the floppy disk from the drive.
► Start the PC and invoke BIOS Setup.
► Select the menu item Reset Configuration in the menu Advanced and change the sett ing to Yes.
► Save the change and terminate BIOS Setup.
The BIOS recovery has now been completed. The system restarts.
i
Detailed information on the BIOS recovery is contained in the manual "BI OS Setup"
("Drivers & Utilities" CD).
Microcode Update What is a microcode update?
As there are no drivers for processors, Intel offers the possibility from the P6 family (Pentium Pro)
on to update the command set (microcode) of the processor. This enables minor errors to be
corrected and the performance to be increased.
To guarantee the best possible performance and error-free operation, Intel recommends updating
the microcode for every new processor. Intel refers to the use of the processor without microcode
updates as operation outside the specifications.
Safety for processor on Fujitsu Siemens Computers mainboards
If the processor uses an old or incorrect microcode, error-free operation cannot be ens ured. Fujitsu
Siemens Computers has therefore implemented a function on its mainboards that interrupts the
booting process if no suitable microcode is available for the instal led processor. The output error
message is
Patch for installed CPU not loaded. Please run the bios flash update
diskette.
This message appears until the microcode update has been carried out. If t he computer is
nevertheless operated without a microcode update, error-free operation is not ensured.
When should a microcode update be carried out?
A microcode update should be carried out after the installation of a new processor.
In contrast to the BIOS update, only an updated version of the processor com mand set is stored.
The system BIOS remains unaffected by this.