4

Popscreen PS15

The frame is 15 cm in diameter.
PS 15.................... blk ........ Cat. No. 008472
Popscreens
Pop screens provide excellent suppression of so-called pop noise,
such as “p” or “t”. They consist of a round, thin frame covered with
black gauze on both sides. A gooseneck of about 30cm (12") in
length is mounted at the popshield. It will be attached to micro-
phone stands by means of a clamp with a knurled screw.
Stand Mounts and Miscellaneous Mechanical Adapters

Stand Mount SGE100

Swivel mount for detached miniature mi-
crophone capsules. A rubber shock
mount suppresses structure-borne
noise. The swivel mount has an M 6
thread (6 mm). Attaching the swivel
mount to the MF 2 table stand, the
SGE 100 replaces the rubber shock
mount of the table stand.
SGE 100 ............... blk........ Cat. No. 006742

Stand Mount SG109

Swivel mount for detached miniature mi-
crophone capsules. It has a 3/8" thread.
SG 10 9 ................. blk ........Cat. No. 008614

Swivel Joint SG 110 nx

The SG 110 nx swivel mount can be in-
serted between KK 1... capsules and the
KM D output stage. The capsule can then
be swiveled and orientated through
±110°. In combination with an elastic
suspension and a table flange, a mechan-
ically decoupled, unobtrusive setup can
be realised, e.g. for TV news announcers.
Length 60mm, Ø 22 mm.
SG 110 nx ............ nx ......... Cat. No. 008611

Stereo Mount STH100

Stereo mount with a swivel mount and
two holders, for two detached miniature
microphone capsules. Two stereo re-
cording methods are then possible.
One holder enables the microphone set-
up according to the “ORTF Method”:
Two detached capsules are snapped into
the clamps at the end of the holder. The
distance between diaphragms is then
170 mm, with an angle of 110°.
The other pair of holders allows stereo
setups according to the “Coincidence
Method”: Capsules are installed acousti-
cally at one point in space, however,
freely adjustable to any angle between
30° and 180°.
The swivel mount has a 5/8"-27 thread,
plus a thread adapter to connect to
1/2"- and 3/8" stands.
STH 100 ............... blk........ Cat. No. 007315

Stereo Mount STH 120

The STH 120 stereo mount accepts two
detached miniature microphone cap-
sules, parallel and one above the other
for MS stereo recordings. It is rotatable
and swivelable. The swivel mount has a
5/8"-27 thread, plus a thread adapter to
connect to 1/2"- and 3/8" stands.
STH 120............... blk........ Cat. No. 008422