New Holland Boomer™ 1000 & T1000 Series
Boomer 1020 Boomer 1025 T1010 T1030
MODEL
ENGINE
Gross engine hp (kW)
PTO hp (kW)
Rated speed, rpm
Cylinders
Displacement, cu. in. (L)
Fuel capacity, gal. (L)
TRANSMISSIONS Hydrostatic transmission Min/Max forward speed
with R4 tires, mph (k/hr)
BRAKES
Location
Type
POWER TAKE OFF (PTO)
Rear
Mid
HYDRAULICS Pump type System type
Pump capacity, gpm (lpm)* Implement flow, gpm (lpm) Steering priority flow, gpm (lpm)
24 in. behind the lift balls, lb. (kg)
3 point hitch control
*@ rated speed
AXLE OPTIONS
FWD
Sensitrak™ Auto FWD
DIMENSIONS (with R4 tires) Overall length witih
in. (mm)
Overall width (minimum), in. (mm) Wheelbase, in. (mm)
Height to top of ROPS, in. (mm) Ground clearance
Shipping weight w/R4 tires, lbs. (kg)
TIRE OPTIONS
Turf Tires
Front
Rear
Industrial Tires
Front
Rear
STANDARDEQUIPMENT:
•Toolbox
•Cup holder
•Foldable ROPS
•12 Volt accessory power outlet
Boomer 1020/T1010 |
| Boomer 1025/T1030 | |
20 (14.9) |
| 26 (19.4) | |
15.5 (11.6) |
| 19.7 (14.7) | |
3000 |
| 3000 | |
3 |
| 3 | |
58.2 (.95) |
| 69.0 (1.1) | |
7.1 (26.9) |
| 7.1 (26.9) | |
| |||
| |||
......................................................... | Single LH side | ||
.............................................................. | Wet disc | ||
540 |
| 540 | |
2200 |
| 2200 | |
...........................................................Gear | Open center | Gear | |
5.6 (21.2) | 5.6 (21.2) | ||
| |||
3.75 (14.20) |
| 3.75 (14.21) | |
1.85 (7.0) |
| 1.85 (7.0) | |
.....................................................700 (318) | Self centering valve | 700 (318) | |
|
| ||
Standard |
| Standard | |
NA |
| Optional | |
96.3 (2445) |
| 96.3 (2445) | |
46.4 (1180) |
| 46.4 (1180) | |
55.1 (1400) |
| 55.1 (1400) | |
72.4 (1840) |
| 72.4 (1840) | |
7.3 (185) |
| 7.3 (185) | |
1455 (660) |
| 1455 (660) | |
................................................. | |||
................................................ | |||
.................................................. | |||
................................................. | |||
OPTIONAL EQUIPMENT: |
|
| |
FRONT ATTACHMENTS | REAR ATTACHMENTS | ||
• Loader | • 60” | • Finishing mowers | |
• | • Grass catcher | • Rotary tiller | |
• |
| • Ballast box | |
• |
|
| |
Visit our Web site at www.newholland.com/na. Or, call
Design, materials and/or specifications are subject to change without notic e and withou t liability therefor. Specifications are applicable to units sold in Canada, the United States, its territories and possessions, and may vary outside these areas.
Safety begins with a thorough understanding of the equipment. Always make sure you and your operators read the Operator’s Manual
before using the equipment. Pay close attention to all safety and operating 
decals and never operate machinery
without all shields, protective devices and structures in place.
© 2008 CNH America LLC
New Holland is a registered trademark of CNH America LLC.
Page 1 of 1
