New Holland 300GM Series Rear-Mounted
Finishing Mower Specifications
310GM | 320GM | 330GM |
|
|
|
| MODEL |
|
| 310GM | 320GM | 330GM |
PACKAGE |
|
| 100 | 200 | 300 |
| SIZE, in. (mm) |
| 60 (1524) | 72 (1829) | 90 (2286) | |
.................................Category I | |||||
Discharge, rear only | ......................................... | Rear | |||
Discharge safety chain | ................................................................. | Standard | |||
Size, cutting width, in. (mm) | 60 (1524) | 72 (1829) | 90 (2286) | ||
PTO HP rating |
| up to 30 | up to 40 | up to 60 | |
Number of blades |
| 3 | 3 | 5 | |
Blade speed, rpm |
| 2,630 | 2,230 | 2,630 | |
Standard PTO, rpm |
| 540 | |||
V belt drive | ....................................................................................................................................... |
| Standard | ||
Cutting height range, in. (mm) | 1 to 4 (25 to 102) | ||||
Solid rubber gauge wheels, fully rotating | 4 | ||||
Weight, lbs. (kg) |
| 435 (197) | 500 (227) | 683 (310) | |
Visit our Web site at www.newholland.com/na. Or, call
Design, materials and/or specifications are subject to change without notic e and withou t liability therefor. Specifications are applicable to units sold in Canada, the United States, its territories and possessions, and may vary outside these areas.
Safety begins with a thorough understanding of the equipment. Always make sure you and your operators read the Operator’s Manual
before using the equipment. Pay close attention to all safety and operating 
decals and never operate machinery
without all shields, protective devices and structures in place.
© 2008 CNH America LLC
New Holland is a registered trademark of CNH America LLC.
