New Holland
Flail Mower Specifications
918H | 918L |
|
|
|
MODEL |
| 918H | 918H | 918H |
SIZE |
|
|
|
|
PTO hp rating | 70 | |||
Rated speed (rpm) | 540 | |||
Nominal cutting width, in. (mm) | 60 (1524.0) | 71 (1803.4) | 88 (2235.2) | |
Offset adjustment to right, in. (mm) | 28 (711.2) | 28 (711.2) | 24 (609.6) | |
Offset adjustment to left, in. (mm) | n/a | 4 | 6 | |
Cutting height range, in. (mm) | 0.5 to 5 (13 to 127) | 0.5 to 5 (13 to 127) | 0.8 to 5 (19 to 127) | |
Cutting height adjustment increments, in. (mm) | 1 (25.4) | |||
Rotor diameter, | 15.8 (401.32) | 15.8 (401.32) | 16.50 (419.1) | |
Rotor rotation | forward/reverse | |||
Guage roller diameter, in. (mm) | 5.2 (132.1) | |||
Blade mounting | single hinge | |||
Blade type | standard | |||
Number of blades | 80 | 96 | 128 | |
Blade tip speed (fpm) | 9237 | 9237 | 9659 | |
Rotor shaft speed (rpm) | 2236 | |||
Thickness of flail deck, in. (mm) | 0.16 (4.0) | |||
Thickness of flail ends, in. (mm) | 0.24 (6.0) | |||
Lift linkage | flexible | |||
I or II | ||||
Weight, lbs. (kg) | 697 (316.2) | 792 (359.3) | 957 (434.1) | |
MODEL |
| 918L | 918L |
|
SIZE |
|
|
| |
PTO hp rating | 30 |
| ||
Rated speed (rpm) | ..............................540 |
| ||
Nominal cutting width, in. (mm) | 50 (1270) | 60 (1524) |
| |
Offset adjustment to right, in. (mm) | 10 (254) | 20 (508) |
| |
Offset adjustment to left, in. (mm) | .................................n/a |
| ||
Cutting height range, in. (mm) | 0.75 to 3 (19 to 76) |
| ||
Cutting height adjustment increments, in. (mm) | 0.75 (19.1) |
| ||
Rotor diameter, | 13.5 (342.9) |
| ||
Rotor rotation | ...........................reverse |
| ||
Guage roller diameter, in. (mm) | 3.5 (88.9) |
| ||
Blade mounting | single hinge |
| ||
Blade type | ...............................fine |
| ||
Number of blades | 80 | 96 |
| |
Blade tip speed (fpm) | .........................7,522 |
| ||
Rotor shaft speed (rpm) | 2,137 |
| ||
Thickness of flail deck, in. (mm) | 0.1 (2.5) |
| ||
Thickness of flail ends, in. (mm) | 0.2 (5.0) |
| ||
Lift linkage | .............................fixed |
| ||
............................... I |
| |||
Weight, lbs. (kg) | 348 (157.9) | 383 (173.7) |
|
Visit our Web site at www.newholland.com/na. Or, call
Design, materials and/or specifications are subject to change without notic e and withou t liability therefor. Specifications are applicable to units sold in Canada, the United States, its territories and possessions, and may vary outside these areas.
Safety begins with a thorough understanding of the equipment. Always make sure you and your operators read the Operator’s Manual
before using the equipment. Pay close attention to all safety and operating decals and never operate machinery
without all shields, protective devices and structures in place.
© 2008 CNH America LLC
New Holland is a registered trademark of CNH America LLC.