New Holland Super Boom™
Compact TrackLoader Specifications
C175 C185 C190
MODEL | C175 | C185 | C190 | ||
ENGINE |
|
|
|
|
|
Make and model | New Holland N844LT | New Holland 334T/M2 | New Holland 445/M2 | ||
Fuel | Diesel |
| |||
Gross power @ RPM, hp (kW) | 60 (45) @ 2900 | 78 (58) @ 2300 | 80 (60) @ 2300 | ||
Net power @ RPM, hp (kW) | 56 (42) @ 2900 | 72 (54) @ 2300 | 74 (55) @ 2300 | ||
Peak torque, | 128 (174) @ 1700 | 228 (309) @ 1400 | 236 (320) @ 1400 | ||
Number of cylinders | 4 |
| 3 |
| 4 |
Displacement, cu. in. (l) | 135.3 (2.2) | 205 | (3.4) | 274 | (4.5) |
Aspiration | Turbocharged | Turbocharged | Natural | ||
Cooling type | Water |
| |||
DRIVE TRAIN |
|
|
|
|
|
Max travel speed- forward, mph (kph) | 7.4 (11.9) | 8 (12.9) | 8 (12.9) | ||
Width over tracks, in. (mm) | 71.1 (1810) | 82.4 (2090) | 82.4 (2090) | ||
Track width, in. (mm) | 12.6 (320) | 17.7 | (450) | 17.7 | (450) |
HYDRAULICS |
|
|
|
|
|
System type | Open |
| |||
Main pump type | Gear |
| |||
Total flow, gpm (l/min) | 17.2 (65.1) | 19.3 (73.1) | 21.9 (82.9) | ||
Main relief pressure, psi (bar) | 2,550 (176) | 3,050 (210) | 3,050 (210) | ||
Optional high flow, gpm (l/min) | 25.5 (96.5) | 34.7 (131.3) | 37.3 (141.2) | ||
PERFORMANCE |
|
|
|
|
|
LOADER ARMS |
|
|
|
|
|
Linkage geometry | Vertical lift |
| |||
Rated operating load (35% of tipping load), lbs. (kg) | 2,200 (998) | 2,500 | (1134) | 2,900 | (1316) |
Straight tipping load, lbs. (kg) | 6,300 (2858) | 7,286 | (3305) | 8,286 | (3759) |
Bucket breakout force, lbs. (kg) | 4,312 (1956) | 7,670 | (3479) | 7,670 | (3479) |
Max dump angle at full height, degrees | 43 | 45 | 45 | ||
Dump clearance at full height discharge, in. (mm) | 95 (2410) | 100 (2540) | 101.9 | (2590) | |
Dump reach at full height discharge, in. (mm) | 30.7 (780) | 32.7 | (830) | 32 (810) | |
Max hinge pin height, in. (mm) | 119.2 (3030) | 124.7 | (3170) | 125.6 | (3190) |
Bucket rollback at carry position, degrees | 37 |
| |||
DIMENSIONS |
|
|
|
|
|
Length with bucket down, in. (mm) | 129.5 (3290) | 140 (3560) | 148.5 | (3770) | |
Width w/bucket, in. (mm) | 72 (1830) | 84 (2130) | 84 (2130) | ||
Height to top of cab, in. (mm) | 75.4 (1920) | 78 (1980) | 79.6 (2020) | ||
Ground clearance, in. (mm) | 7.9 (200) | 10.1 | (260) | 10.1 | (260) |
OTHER FEATURES |
|
|
|
|
|
Standard ROPS | Tilt forward |
| |||
Self leveling bucket | Std |
| |||
OPERATING WEIGHTS |
|
|
|
|
|
Operating weight, lbs. (kg) | 7,535 (3418) | 9,155 | (4153) | 9,811 | (4450) |
SERVICE CAPACITIES |
|
|
|
|
|
Fuel tank, gal. (l) | 14.4 (55) | 18 (68) | 21.5 (81) | ||
Cooling system, gal. (l) | 4.5 | (17) |
| ||
Hydraulic system total, gal. (l) | 8.6 (33) | 15 (57) | 15 (57) | ||
C175 - Equipped with 72" dirt and foundry bucket and 12.6" track belt width
C185/C190 - Equipped with 84" dirt and foundry bucket and 17.7" wide track belt width
Visit our Web site at www.newholland.com/na. Or, call
Design, materials and/or specifications are subject to change without notic e and withou t liability therefor. Specifications are applicable to units sold in Canada, the United States, its territories and possessions, and may vary outside these areas.
Safety begins with a thorough understanding of the equipment. Always make sure you and your operators read the Operator’s Manual
before using the equipment. Pay close attention to all safety and operating 
decals and never operate machinery
without all shields, protective devices and structures in place.
© 2008 CNH America LLC
New Holland is a registered trademark of CNH America LLC.
Page 1of 1
