Keeping bearings alive
When the crop processor is not used, it is out of the crop flow but it is still driven. This continuous running of the bearings will eliminate pitting or other excessive wear otherwise caused by a stationary position in a vibrating assembly.
Variflow™ blower positioning system reduces conversion time
To optimize daily performance in periods when harvesting grass and maize or whole crop are overlapping, the Variflow™ system can change between the two positions in less than 2 minutes by one person without tools. While switching positions there’s no need to worry about the belt tension anymore, with New Holland’s patented tensioning system ensuring the correct belt tension
in both positions. Between crop seasons an optional hoist allows removal of the crop processor in less than 20 minutes.
Easy and cheap to maintain
Less pto shafts and less gear boxes mean less service interventions. Accessibility to the large coolers is easy and a rotary brush removes any dust that enters the radiator compartment.
Saving time and money for any service intervals is further achieved thanks to the full access to filters and oil level indicators. The large covers are easily swung out of the way offering a clear view on all servicing locations reducing
13
