New Holland
Air Hoe Drill Specifications
P2060
BASE SIZE, ft. (m) | 60 (18.3) | 70 (21.3) |
No. of sections | 5 | 5 |
No. of ranks | 4 | 4 |
WORKING WIDTHS, ft. (m) (outside shank to outside shank + spacing) |
|
|
7.5 (19.1) in. (cm), spacing | 60 (18.3) | N/A |
10 (25.4) in. (cm), spacing | 60 (18.3) | 70 (21.3) |
12 (30.5) in. (cm), spacing | 60 (18.3) | 70 (21.3) |
NUMBER OF SHANKS |
|
|
7.5 (19.1) in. (cm), spacing | 96 | N/A |
10 (25.4) in. (cm), spacing | 72 | 84 |
12 (30.5) in. (cm), spacing | 60 | 70 |
FRAME WIDTHS, ft. in. (m) |
|
|
Main frame | 10' 0" (3.05) | 10' 0" (3.05) |
Inner wing | 15' 0" (4.57) | 15' 0" (4.57) |
Outer wing | 10' 0" (3.05) | 15' 0" (4.57) |
Transport width | 17' 8" (5.38) | 17' 8" (5.38) |
Transport height (max) | 13' 6" (4.11) | 13' 6" (4.11) |
WEIGHTS, lb. (kg) (All with 350 lb. trips and 3 in rubber packers) |
|
|
7.5 (19.1) in. (cm), spacing | 36,300 (16,466) | N/A |
10 (25.4) in. (cm), spacing | 32,800 (14,878) | 36,500 (16,556) |
12 (30.5) in. (cm), spacing | 31,100 (14,107) | 34,400 (15,604) |
TIRES |
|
|
Main frame casters | 11Lx15FI (Duals) | 11Lx15FI (Duals) |
Inner wing casters | 11Lx15FI (Duals) | 11Lx15FI (Duals) |
Outer wing casters | 11Lx15FI (Singles) | 11Lx15FI (Singles) |
Rear transport wheels | 11Lx15FI (Single) | 11Lx15FI (Single) |
Packer options, 7.5" (19.1 cm), spacing | Steel - |
Packer options, 10"and 12" (25.4 or 30.5 cm), spacing | Steel. - |
Packer wheel mud scrapers | .......................................Optional for steel and rubber wheels |
Stone kickers | ..............................................................Standard |
Openers | ...................................................NEW |
Seed boots | ................................Wide range of Flexicoil ground openers available |
Air kits | .....................................Single shoot and double shoot available |
Blockage monitors | ..................Basic or expanded blockage monitors available; pin sensors and optical sensors |
Tandem wheels for center | ....Standard; also 12.5x15FI |
Tandem wheels for wings | Optional; also 12.5x15FI |
Optional | |
Disc levellers | ...............................................................Optional |
Trip assemblies, 7.5" (19.1 cm), spacing | ................350 lb. & 550 lb |
Trip assemblies, 10" and 12" (25.4 or 30.5 cm), spacing | ......................................350 lb. & 550 lb |
Trip assemblies | 1" x 2" 50° |
Rank to rank spacing, in. (cm) | 26 (66) |
Frame depth, in (cm) | 108 (274.3) |
Caster to packer depth, in. (cm) | 148 (375.9) at |
Frame/ground clearance | ................................28 to 32 (71.1 to 81.3) depending on openers |
Hydraulic system | |
Depth control | Each wing follows ground independently (not affecting adjacent sections); single point adjustment |
Safety chain and lights | ..............................................................Standard |
Transport locks | .............................................Standard |
Rear tow hitch | Optional; patented steering design to aid in cornering and limit sidehill skewing |
Packing pressure adjustment | .................................Each frame section independently adjustable |
Visit our Web site at www.newholland.com/na. Or, call
Design, materials and/or specifications are subject to change without notic e and withou t liability therefor. Specifications are applicable to units sold in Canada, the United States, its territories and possessions, and may vary outside these areas.
Safety begins with a thorough understanding of the equipment. Always make sure you and your operators read the Operator’s Manual
before using the equipment. Pay close attention to all safety and operating decals and never operate machinery
without all shields, protective devices and structures in place.
© 2008 CNH America LLC
New Holland is a registered trademark of CNH America LLC.