Newcon Optik BDN 7x50 Warranty, Unit flashes, Condensation accumulates on the parts

Models: BDN 7x50

1 6
Download 6 pages 24.75 Kb
Page 3
Image 3

If the view still does not seem in focus clean the lenses; they could be foggy or dusty.

Unit flashes

It is normal for the unit to flash within the first 2 minutes of activation. If the flashing continues afterwards the following is a possible cause: bright environment (even with the caps closed!)

Condensation accumulates on the parts.

It is O.K. to use the unit in cold. However, when the unit is brought from the cold into a warm environment, it has to warm up for up to 2 hours (not minutes!). Only then it is allowed to turn it on again.

Visibility decreases and / or disappears.

Bright light sources (moon, projectors, or headlights) may cause visibility to degrade or even completely disappear. Move the binocular away from the light source immediately. The image should restore in within 2 minutes.

Poor atmospheric conditions such as fog, haze or extremely dark environments will decrease the visibility distance of the unit.

8. WARRANTY:

NEWCON OPTIK warrants this product against defects in material and workmanship for one year from the date of the original date of consumer's purchase, but no more than 18 months from the date of manufacturing. Should your NEWCON product proves to be defective during this period, please bring the product

10

NEVER disassemble the unit. This device contains high voltage elements, which may be hazardous to your health!

NEVER expose the opened objective lenses of the activated unit with a switch in the night (‘N’) position to daylight. (Note: 1st generation units remain active for a few minutes after switching the unit off). If you test the night channel during daytime, caps must cover the objective lenses. There is a tiny hole in the lens caps to provide enough light for such testing.

NEVER aim active unit at intense light sources (i.e. lights, headlamp, campfires, the moon, etc.). You can harm your eyes in daytime and spoil the device in nighttime.

NEVER reverse the batteries polarity.

NEVER connect the unit to external power sources

ALWAYS keep the objective lenses covered when not in use

ALWAYS store in a warm dry place when not in use

ALWAYS remove battery when not in use for a long period

THANK YOU

FOR PURCHASING THE DAY / NIGHT BINOCULAR BDN 7x50. PLEASE DEMAND TO CHECK THE DEVICE FOR PROPER OPERATION WHEN BUYING IT. PLEASE READ ALL THE INSTRUCTIONS CAREFULLY BEFORE USING.

3

Page 3
Image 3
Newcon Optik BDN 7x50 operation manual Warranty, Unit flashes, Condensation accumulates on the parts