Operation with Photo cameras, Video Cameras and CCTV-Systems
• Remove the ocular from the unit by unscrewing it from the body of the unit.
• Install instead of the ocular, proper photo-video or CCTV-adapter.
• Connect the NVD with an adapter to photo-,
video- or CCTV - camera (further referred to as cam-
era) with reference to instruction related to specific
adapter.
• If required place the unit along with the cam-
era on a tripod.
• Turn on the unit and the camera.
• Focus the unit with the help of focusing ring
on a adapter or camera.
• Point the NVD with the camera on the object of your choice.
• Establish maximum resolution of the image by focusing the objective ring located on the objective
lens of the unit.
• At this stage you can take photos or make a video at night.
OPERATION INSTRUCTIONS (con’t)
19
Using the unit with external power supply of car adapter
• Remove battery house cover.
• Remove the battery «ÀÀ» and insert a external power adapt-
er (optional). Lock the cap of an adapter into place.
• Connect the power source to slot of external power supply
cable( or car adapter ) with a standard low voltage plug type 5,5/
2,1.
• Connect second end of the cable to external power source,
make sure that polarities are correct or connect the cable to ciga-
rette lighter slot.
• Turn ON the unit.
OPERATION INSTRUCTIONS (con’t))18