2- Use five VS-1.2a’s (front left, center and right, rear left and right) and a separate powered subwoofer (NHT SubOne or SubTwo) for the low frequency effects channel.

For a no-holds-barred home theater system starting with either of the above configurations, powered subwoofers may be employed on any or all five channels to provide balanced bass and increased impact.

„Connections

Before connecting speakers to your system, it is very important that you turn off the power to your amplifier / receiver to avoid damage to the equipment.

The VS-1.2a is compatible with virtually all quality amplifiers. Proper wiring of the speaker is essential to good sound. At a minimum, 16 AWG speaker cable is recommended for runs of 10 feet or less, with 14 AWG cable used for larger runs. For specialty cable considerations, consult your local authorized NHT retailer. For best results, use equal length runs of cable for all three front speakers. Prepare your cable by stripping 1/4” to 3/8” of insulation from the ends and twisting the exposed wire strands tightly. The five-way bind- ing posts on the back of the speaker will accept raw wire, banana plugs, or spade plugs. Tighten the binding posts by hand, as pliers can strip or break them.

Be sure to wire all the speakers “in-phase.” That is, the Positive (red) terminal on the amplifier output must be connected to the corresponding Positive (red) terminal on the speaker. Likewise with the Negative (black) terminals. All speaker wires have some sort of marking along one or both conductors to help you make the correct connections. Incorrect speaker phase is indicated by weak bass and the lack of a well-defined stereo image.

To minimize noise pickup, segregate cables by function. Do not run low level signal cables parallel to power cables, speaker cables, or digital cables. Also, do not run speaker cables or digital cables parallel to power cords or parallel to each other. If different types of cables are placed near each other at some place in your system, separate them by the maximum practical distance and cross them at right angles where they meet. Do not twist or tie AC power cords with speaker cables.

„Operation

The VS-1.2a was designed to handle a wide range of listening levels, but every speaker has limits. It is important to use common sense and listen for signs of possible distress from the speakers. Underpowered amplifiers are most often the cause of speaker damage. For example, a 60-watt amplifier runs out of power when called upon to produce more than 60 watts, and the resulting distortion can damage the speaker. If you tend to listen at high voumes, more powerful amplifiers are preferable because they are less likely to run out of power.

Noticeable distortion or harsh breakup is an indication that either your amplifier or your speakers are running beyond their capacity, and the volume should be decreased. If you can feel any heat emanating from the woofer or tweeter, reduce the level immediately. Speaker damage most often occurs from sustained high volume levels, not from transient sounds or brief musical peaks. Excessive boosting of bass, treble or equalizer controls can worsen the problem, and is not recommended.

„Maintenance

Your speakers require minimal maintenance under normal use. The cabinet may be cleaned using a damp cloth or a mild, non-abra- sive glass cleaner. To clean the grille, first remove it from the speaker, then brush lightly with a soft brush or use a vacuum on its lowest setting. Do not expose the speaker to direct sunlight, high temperatures, or moisture. Do not attempt to clean the actual drivers.

Limited Warranty

Valid Only in the U.S.A.

Warranty Period

For the period of 5 years for parts and 5 years for labor from date of original purchase (the warranty period) from an authorized NHT dealer, Now Hear This (NHT) warrants that if our product fails to function properly under normal use due to a manufacturing defect when installed and operated according to the owner’s manual instructions enclosed with the unit, it will be repaired or replaced with a unit of comparable value at the option of NHT without charge to you for parts or actual repair work. Parts supplied under this warranty may be new or rebuilt at the option of NHT.

What’s Not Covered

This warranty does not cover any product which is used in any trade or business, or in an industrial or commercial application.

This warranty does not cover the cabinet or any appearance item, or any damage caused to the product resulting from: alterations, modifications not authorized in writing by NHT, accident, misuse or abuse, damage due to lightning or power surges, or being subjected to power in excess of the speaker’s published power rating.

This warranty does not cover the cost of parts which would otherwise be provided without charge under this warranty, obtained from any source other than an authorized NHT service location. This warranty does not cover defects or damage caused by the use of unauthorized parts or labor or from improper maintenance.

Altered, defaced or removed serial numbers void this warranty.

Your Rights

The liability of NHT will be limited to the purchase price of the product, and NHT will not be liable for incidental or consequential damages. NHT limits its obligations under any implied warranties under state laws to a period not exceeding the warranty period. Some states do not allow limitations on how long an implied warranty lasts, and some states do not allow the exclusion or limitation of incidental or consequential damages. The above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may have other rights which vary from state to state.

To Obtain Service

NHT has appointed a number of authorized service companies throughout the USA should your product ever require service. To receive warranty service, you will need to present your sales receipt showing place and date of original owner’s transaction.

To find the name and address of the nearest authorized NHT service location, call 800-NHT9993or write: NHT, 6400 Goodyear Road, Benicia, CA 94510.

Keep this warranty with your sales receipt. Record date and place of purchase for future reference.

5

Page 5 Page 6
Page 6
Image 6
NHT VS-1.2a owner manual „ Connections, „ Operation, „ Maintenance, Limited Warranty Valid Only in the U.S.A
Page 5 Page 6

VS-1.2a specifications

The NHT VS-1.2a is a well-regarded speaker system that combines modern technology with thoughtful design to deliver exceptional sound quality. This speaker model is part of the NHT brand, which has a reputation for producing high-fidelity audio equipment. The VS-1.2a is designed primarily for home audio use, catering to audiophiles who seek both aesthetics and performance.

One of the standout features of the NHT VS-1.2a is its robust build quality. The cabinet is constructed from high-density MDF (medium-density fiberboard), which helps minimize resonance and coloration of the sound. This careful attention to cabinet design contributes to the speaker's superior acoustics. The VS-1.2a is available in several finishes, allowing it to blend seamlessly with various home decors.

Technologically, the NHT VS-1.2a employs advanced driver components. The speaker uses a 5.25-inch woofer that is engineered to produce deep and precise bass response. Accompanying the woofer is a 1-inch silk dome tweeter, known for its smooth high-frequency response. Together, these drivers create a balanced sound profile that covers a wide range of frequencies, ensuring that both music and movies are reproduced with clarity and detail.

Another notable characteristic of the VS-1.2a is its versatility. Whether used in a two-channel stereo setup or as part of a multi-channel home theater system, this speaker adapts well to various audio configurations. Its compact size makes it suitable for smaller spaces, while still delivering powerful sound performance.

Moreover, the NHT VS-1.2a features a well-designed crossover network that efficiently directs frequencies to the appropriate drivers. This results in less distortion and improved tonal coherence, making every listening experience more enjoyable. The speaker is also capable of handling considerable power, which affords users the ability to play their audio at elevated volume levels without compromising sound quality.

In summary, the NHT VS-1.2a stands out for its combination of high-quality construction, advanced driver technology, and versatility in use. Its ability to deliver exceptional sound in both stereo and multi-channel home theater applications makes it an ideal choice for anyone looking to elevate their audio experience. The NHT VS-1.2a not only meets but exceeds the expectations of discerning listeners, ensuring it remains a popular choice among audio enthusiasts.
Top Page Image Contents