Nikon 1532, 1533, 1534 AGray Panels, Auto off timers, DPreset White Balance, 132P, S, A, and M Modes, DMeasuring Preset White Balance

DMeasuring Preset White Balance

If no operations are performed while the displays are flashing, direct measurement mode will end in the time selected for the Auto off timers option in the setup menu (0 245). The default setting is eight seconds.

DPreset White Balance

The camera can store only one value for preset white balance at a time; the existing value will be replaced when a new value is measured. Note that exposure is automatically increased by 1 EV when measuring white balance; when shooting in mode M, adjust exposure so that the exposure indicator shows ±0 (0 109).

AOther Methods for Measuring Preset White Balance

To enter preset measurement mode (see above) after selecting preset white balance in the information display (0 125), press J for a few seconds. If white balance has been assigned to the Fn button (0 251), white balance preset measurement mode can be activated by keeping the Fn button pressed for a few seconds after selecting preset white balance with the Fn button and command dial.

AGray Panels

For more precise results, measure white balance using a standard gray panel.

132P, S, A, and M Modes