AMovie Mode

 

 

 

The ML-L3 shutter-release button functions as the movie-record button

 

 

 

for advanced movie mode (0 59).

 

 

 

AUsing a Flash

 

 

 

When using the built-in flash, press the flash pop-up button to raise the

 

 

 

flash before shooting. Shooting will be interrupted if the flash is raised

 

 

 

while the delayed-remote timer is counting down.

 

 

 

In remote control mode, the flash starts charging while the camera is

 

 

 

waiting for the signal from the remote. The camera will only respond to

 

 

 

the shutter-release button on the remote control when the flash is

 

 

 

charged. If red-eye reduction (0 106) is used when # is selected, the

 

 

 

shutter will be released about one second after the red-eye reduction

 

 

 

lamp lights. If " is selected, there will be about a two second delay

 

 

 

after the shutter-release button on the remote control is pressed; the

 

 

 

red-eye reduction lamp will then light for about one second before the

 

 

 

shutter is released.

 

 

 

ASee Also

 

t

 

 

For information on choosing how long the camera will wait for a signal

 

 

 

from the remote, see page 213.

 

 

 

 

98