Nikon 4DIF instruction manual Nomenclature, Mounting the Lens

NOMENCLATURE
(T) Lens hood screw		®	Built-in rotating tripod collar
(2) Focus lock buttons (four buttons		@	Strap eyelets
	provided)	®	Focusing limit switch
(3) Distance index		®	Glass filter holder
(4) Depth-of-field indicators		@	Gelatine filter holder plate
©	Distance scale	@ Gelatine filter holder
(6) Focus mode ring		@	Aperture index
@	Tripod collar alignment index	@	Aperture scale
(8) Tripod collar alignment scale		(§) Minimum aperture lock lever
(9) Filter holder mounting index		@ Aperture-direct-readout scale
@	Filter holder knob	@	Minimum aperture signal post (EE servo
® Lens hood HK-21			coupling post)
@ Focusing ring		@	CPU contacts
@	Focus mode button	@	Aperture indexing post
@	Focus mode index	@ Meter coupling ridge
@ Tripod collar lock screw		@	Aperture ring

Before using your new lens, read the following carefully so you get the most out of your lens now and for years to come.

IMPORTANT!

•Be careful not to soil or damage the CPU contacts.

•Do not attach the following accessories to the lens, as they might damage the lens' CPU contacts:

Auto Extension Ring PK-1, Auto Extension Ring PK-11/PK-11A, Kl Ring, Auto Ring BR-2/BR-2A/BR-4.

•This lens cannot be used with the AF Finder DX-1 attached to the Nikon F3AF camera.

MOUNTING THE LENS

To mount, position the lens on the camera's bayonet mount, lining up the aperture index on the lens with the lens mounting index on the camera. Twist the camera body clockwise until it clicks into place.

To remove, press the lens' release button on the camera and turn the camera body counterclockwise. For details, refer to the camera's instruction manual.

11