28
Common Radio Features
Conventional Scan Only
Make a Dynamic Priority Change
While the radio is scanning, the dynamic priority change feature lets
you temporarily change any channel in a scan list (except the Priority
1 channel) to the Priority 2 channel. The replaced Priority 2 channel
becomes a non-priority channel. This change remains in effect until
scan is turned off, then scanning reverts back to the preprogrammed
state.
2The radio continues
scanning the remaining
channels in the list. To
resume scanning the deleted
channel, change channels or
turn scan off and then back
on again.
1When the radio is locked
onto the channel to be
designated as Priority 2,
press the preprogrammed
Dynamic Priority button.
Note: The Priority 1 channel
cannot be changed to
Priority 2.
2The radio continues
scanning the remaining
channels in the list. To
resume scanning the
preprogrammed Priority 2
channel, you must leave and
re-enter scan operation.
94C25-G_XTS5000Mdl1.book Page 28 Tuesday, May 6, 2008 6:09 PM