3Press the Qbuttons again.

Press the Q(Iand O) buttons together a second time to format the memory card. Do not remove the memory card or remove or disconnect the power source during formatting.

s

When formatting is complete, the

 

control panel and viewfinder will show

 

the number of photographs that can

 

be recorded at current settings.

DMemory Cards

Memory cards may be hot after use. Observe due caution when removing memory cards from the camera.

Memory cards that have been formatted in a computer or other device must be reformatted in the camera before they can be used for recording or playback.

Turn the power off before inserting or removing memory cards. Do not remove memory cards from the camera, turn the camera off, or remove or disconnect the power source during formatting or while data are being recorded, deleted, or copied to a computer. Failure to observe these precautions could result in loss of data or in damage to the camera or card.

Do not touch the card terminals with your fingers or metal objects.

Do not bend, drop, or subject to strong physical shocks.

Do not apply force to the card casing. Failure to observe this precaution could damage the card.

Do not expose to water, high levels of humidity, or direct sunlight.

ANo Memory Card

If no memory card is inserted, the control panel and viewfinder will show S. If the camera is turned off with a charged EN-EL3e battery and no memory card inserted, Swill be displayed in the control panel.

42