138
Q

Connecting the Camera

Connect the camera using the supplied UC-E6 USB cable.
1Turn th e cam era of f.
2Turn the computer on.
Turn the computer on and wait for it to start up.
3Connect the USB cable.
Connect the USB cable as shown.
Do not use force or attempt to insert the
connectors at an angle.
4Turn th e cam era on .
5Transfer photographs.
After following the on-screen instructions to
start NikonTransfer 2, click Start Transfer to
transfer photographs (for more information
on using NikonTransfer 2, start ViewNX 2 or
NikonTransfer2 and select ViewNX 2 Help
from the Help menu).
6Turn the camera off and disconnect the USB cable when transfer ends.
NikonTransfer 2 will close automatically when transfer is complete.
DUSB Hubs
Connect the camera directly to the computer; do not connect the cable via a USB hub
or keyboard.
ACamera Control Pro 2
Camera Control Pro 2 (available separately; 0206) can be used to control the camera from a
computer.
When Camera Control Pro 2 is used to capture photographs directly to the
computer, a capture mode indicator will be displayed in the viewfinder and information
display.
Start Transfer