70

t

Exposure Compensation

Exposure compensation is used to alter exposure from the value suggested by the
camera, making pictures brighter or darker.
It is most effective when used with
M(Center-weighted metering) or N(Spot metering) (068).
Choose from values
between –5EV (underexposure) and +5 EV (overexposure) in increments of 1/3EV.
In
general, positive values make the subject brighter while negative values make it
darker.
1Place the cursor in the information display.
If shooting information is not displayed in the monitor, press the P button.
Press the P button again to place the cursor in the information display.
2Display exposure compensation options.
Highlight exposure compensation in the
information display and press J.
3Choose a value.
Highlight a value and press J.
To return to
shooting mode, press the shutter-release button
halfway.
Norma l ex posu re c an b e res tor ed b y setting exposure compensation to ±0.
Exposure
compensation is not reset when the camera is turned off, but is reset if you select
another mode after choosing %.
–1EV No exposure compensation +1EV
Information display P button