❚❚Pausing Interval Timer Photography

Interval timer photography can be paused by:

•Pressing the Jbutton between intervals

•Highlighting Start > Pause in the interval timer menu and pressing J

•Turning the camera off and then on again (if desired, the memory card can be replaced while the camera is off)

•Selecting self-timer (E) or MUP release mode

To resume shooting:

1Choose a new starting time.

Choose a new starting time as described on page 145.

2Resume shooting.

Highlight Restart and press J. Note that if interval timer photography was paused during shooting, any shots remaining in the current interval will be canceled.

❚❚Interrupting Interval Timer Photography

Interval timer shooting will end automatically if the battery is exhausted. Interval timer photography can also be ended by:

•Selecting Start > Off in the interval timer menu

•Performing a two button reset (0 131)

•Selecting Reset shooting menu in the shooting menu (0 224)

•Changing bracketing settings (0 133)

t Normal shooting will resume when interval timer photography ends.

❚❚No Photograph

The camera will skip the current interval if any of the following situations persist for eight seconds or more after the interval was due to start: the photograph or photographs for the previous interval have yet to be taken, the memory buffer is full, or the camera is unable to focus in AF-Sor when single-servo AF is selected in AF-A(note that the camera focuses again before each shot). Shooting will resume with the next interval.

148