4. Move the power switch ® to uncover the red dot ® .

This turns the camera on and makes it ready for exposure reading and shooting.

5 Touch the shutter release

• button @ lightly.

This activates the exposure meter. The meter stays on for 16 seconds after you take your finger off the button and turns itself off auto- matically to conserve battery power.

6. Check battery power.

Look through the viewfinder @ 7 at the liquid crystal display (LCD). The shutter speed should be dis- played to show that the batteries have been properly installed and their power is adequate. If not, re- place both batteries.

Page 7
Image 7
Nikon 1412059, F3HP Move the power switch to uncover the red dot, Touch the shutter release Button @ lightly