Use of Iris Camera – MEC-2-CB-D60-N105 4
3. Turn on the camera by rotating the switch at the top right of the camera.
Power switch in on position.
4. Pop up the built-in flash by pressing the small button on the left side of the camera top.
Flash Pop-up button.
5. Snap the input end of the lightguide (the 5/8” diameter stainless steel end) into the clip and
slide it towards the flash to a ¼” gap.
The lightguide snaps into the Lightguide clip. Leave ¼” to ½” gap to flash head.