Nikon P310 manual Setup Menu, Panorama assist, or 3D photography

General Camera Setup

The Setup Menu

Press the dbutton Mz(setup) tab (A11)

From the menu screen, select the z tab to display the setup menu, and then you can change the following settings.

Set up

Welcome screen

Time zone and date

Monitor settings

Print date

Vibration reduction

Motion detection

AF assist

	Option	Description	A
		Select the image displayed as the welcome screen
		when the camera is turned on. Select COOLPIX to
	Welcome screen	display the COOLPIX logo. Select Select an image to	E70
General		use a picture taken with the camera as the welcome
		Set settings related to the camera’s date and time. The
		screen. The default setting is None.
Camera		Time zone setting allows you to specify the time zone
		where the camera is mainly used and whether or not
Setup	Time zone and date	daylight saving time is in effect. When the xtravel	E71
		destination is set, the camera automatically calculates
		the time difference between the travel destination and
		the whome time zone, and saves images using the
		date and time of the travel destination.
		In Photo info, select the kind of information that is
		displayed on the monitor during shooting mode and
	Monitor settings	playback mode. If you select Framing grid+auto info,
		a framing grid is displayed when shooting to help you	E74
		frame the picture. Also set the image display after
		shooting, the screen brightness and whether or not to
		display histograms on the monitor.
		Imprint the shooting date and time on pictures at the
		time of shooting. The default setting is Off.
		• Dates cannot be imprinted in the following
		situations.
	Print date	- When the scene mode is set to Easy panorama,	E76
		Panorama assist, or 3D photography
		- When Pre-shooting cache, Continuous H: 120
		fps or Continuous H: 60 fps is selected for
		Continuous (A55) in the shooting menu
		- During movie recording

98