Nikon WT-4 manual Introduction, Windows XP Professional SP2, Computer Ad-hocMode, Get Ready

Introduction

Windows XP

En Configuring the WT-4 for Upload to a

Computer (Ad-hoc Mode)

This document provides basic instructions on configuring the WT-4 wireless transmitter and a Windows XP Professional SP2 computer for transmission over an ad-hoc (peer-to-peer) network consisting solely of the computer and WT-4.

Wireless

WT-4 Computer

Introduction

This section describes a simple wireless network consisting solely of the WT-4 and an computer, with no connections to other networks or devices. Follow the steps below to use the WT-4 in this type of network.

1: Get Ready	pg. 2
2: Assign the Computer an IP Address	pg. 3
3: Configure the Network	pg. 5
4: Copy the Network Profile to the Camera	pg. 8
5: Connect to the Computer	pg. 13

Configuring the WT-4 for Upload to a Computer (Ad-hoc Mode)
Windows XP Professional (SP2)	1