the drywall section can be replaced clean- ly if there is an unseen obstruction behind the wall. BE VERY CAREFUL NOT TO SAW THROUGH EXISTING WIRES, PIPES, OR STRUCTURE. IF YOU FEEL ANY EXTRA RESISTANCE AS YOU ARE CUT- TING, STOP.

4.If you are cutting into lath and plaster walls, use masking tape to outline your penciled marks, drill the four corners with a 1/4” bit and use a razor to score the plaster down to the lath beneath. Then use a chisel to remove all of the plaster within the taped outline. Finally, insert a metal cutting blade into a sabre saw and very slowly and carefully saw the lath. Sawing the lath can easily vibrate plaster off the wall. If you have the patience, use a pair of tin snips to slowly nip away at the lath instead. There is no risk with this method, it is just time consuming.

5.Fill the wall cavity with insulation at this point. Remember to use equal amounts of insulation for each speaker.

6.Slip the mounting bracket through the hole and pull it toward you so that its front edge slides into the hole and stops in place.

7.Attach the frame to the bracket by screwing the frame to the bracket using the supplied screws. Do not overtighten the screws, this will distort the frame and the grilles will not fit (this is not perma- nent, just loosen the screws and the grille will pop in). The screws should pull the frame and bracket together (sandwiching the drywall) so that the frame is absolutely flush with the wall surface. There should be no gaps between the wall and the frame (See Figure 12).

Installation of the Speaker, Sensor and Grille in New or Existing Construction

Installing a Niles MS-1 MicroSensor™ There is a 1/2" round molded "IR Sensor Knockout" on the face of the speaker baf- fle. To prevent damage to the crossover network you must remove the knockout from the rear of the speaker. Do not attempt to remove the knockout with the speaker face up. Lay the speaker face down on a clean carpet or rug. Put the tip of a screwdriver into the center of the round "knockout" and sharply tap the screwdriver handle as necessary. Install the MS-1 using its mounting hex nut and washer so that it is tightly secured to the speaker. Connect all wires and continue your installation.

Installation of the Speaker, Sensor and Grille for New or Existing Construction

16

Page 22 Page 24
Page 23
Image 23
Niles Audio AT5, AT8, AT6 manual
Page 22 Page 24

AT6, AT8, AT5 specifications

Niles Audio, a renowned name in the audio industry, offers a range of exceptional in-wall and in-ceiling speakers designed to deliver high-quality sound without compromising the aesthetics of your living space. Among their outstanding offerings are the AT5, AT6, and AT8 models, each featuring unique attributes tailored to meet diverse listening preferences and installation environments.

The Niles AT5 is a compact yet powerful speaker that boasts a two-way design with a 5.25-inch woofer and a 1-inch tweeter. The AT5 is engineered to provide remarkable sound clarity and a balanced frequency response, making it ideal for small to medium-sized areas. Its shallow mounting depth facilitates easy installation, even in tight spaces. The speaker's sleek profile and paintable grille allow it to blend harmoniously with any interior décor, making it an excellent choice for homeowners seeking both performance and style.

Moving up the range, the Niles AT6 features a larger 6.5-inch woofer, enhancing its bass reproduction while maintaining detailed mid-range and treble frequencies. This model is well-suited for medium-sized rooms and can serve as part of a multi-room audio system. The AT6 incorporates Niles’ innovative technology, including a unique shallow enclosure design and a pivoting tweeter, allowing for directional sound customization. This feature is instrumental in optimizing the listening experience by directing audio toward the listening area.

At the top of the series, the Niles AT8 showcases an impressive 8-inch woofer that offers deep, rich bass response and powerful sound output. This model excels in larger spaces and is perfect for immersive home theater experiences. The AT8 also features advanced acoustic engineering, including optimized crossover networks and high-quality components to ensure minimal distortion and exceptional sound fidelity. Its robust construction and adjustable mounting system provide flexibility during installation.

All three models are part of Niles Audio's commitment to delivering premium sound experiences with aesthetic considerations. They are designed to integrate seamlessly into any home while offering superior performance. The speakers are also backed by Niles’ reputation for durability and reliability, ensuring they will provide outstanding audio performance for years to come. Whether you choose the AT5, AT6, or AT8, Niles Audio offers options that cater to various audio needs, ensuring an exceptional listening experience for every room in the house.
Top Page Image Contents