Niles Audio GSS10 Introduction, Parts List, Tools Required for Installation, Optional Features

Introduction

Thank you for purchasing the GSS10 In-ground subwoofer from Niles. With proper installation and operation, you’ll enjoy years of trouble-free use.

Parts List

1 GSS10 Subwoofer

1 GSS10 Bass Port Tube

8 Hex Screws

1 Hex Wrench

Tools Required for Installation

Spade, Shovel, or Trench Tool Wire Strippers

Bubble Level

Direct Burial Rated Speaker Cable 16AWG for wire runs of up to 100 ft 14AWG for wire runs up to 150 ft 12 AWG for wire runs up to 200 ft

Optional Features

A 70v transformer kit is available for the GSS10. It is the GSS70V, Niles Part Number FG01675

GSS10 Assembly

Remove both the subwoofer and the bass port tube from their packaging. Using the hex wrench provided, securely attach the port tube to the subwoofer. When properly oriented, the port tube should be “Up” when the subwoofer is resting on its base.

Make sure that each of the hex screws is securely tightened to prevent the possibility of any vibration or rattling from the subwoofer when installed. Once assembled, the subwoofer is ready for installation.

2 WWW.NILESAUDIO.COM