FEATURES
AND
BENEFITS
(CONTINUED)
gaps between the wall and the | |
Construction | frame. Additionally, the Niles |
All of the drivers, the frames | mounting system is carefully |
and the baffles are weather- | optimized to stiffen the sur- |
proof. The aluminum grilles | rounding drywall and prevent it |
are rustproof and the mounting | from resonating. You hear only |
screws are all stainless steel. | the music, not the drywall. |
point your remote control at the speaker with the
Baffle
The
amplifiers. This allows many pairs of HD speakers to be wired to a single amplifier using a Niles speaker selection system.
Low Diffraction, Paintable Aluminum or Cloth Grilles
Absolutely Flush to the Wall Appearance
The unique mounting system of the HD loudspeakers powerful- ly clamps the frame to the bracket, sandwiching the wall material between them. Because the clamping action is totally uniform around the frame there are no shadows or
Infrared Sensor Mount
The speaker baffle has a locator designed for the Niles
specially molded ribs to add rigidity to the baffle.The end result is better bass and improved midrange detail.
Six Ohm Impedance
HD speakers are designed to be placed in
HD speakers are available with aluminum or cloth grilles. The painted rustproof aluminum grille has hundreds of precisely sized perforations, creating an acoustically transparent grille. The cloth grille is covered with a color coordinated acoustical- ly transparent cloth.
APPLICATION
NOTES
Model HD-800 Shown
Bracket | Wire ties on bracket |
| keep wire attached |
| throughout New |
| Construction |
Three Stage Installation System
Prevents Theft and Simplifies
Painting
You install only the parts you need for a particular stage of construction. When the framing and wiring are finished, you install the bracket. After the drywall is up, but before the painter begins to paint, you install the frame and provide the rustproof aluminum grilles to the painter so that they can be painted to match the
surroundings. Only when construction is completely finished do you put the valu- able speaker in the wall.
Easy Retrofit Installation
Designed for ease of installation, the Niles mounting system makes retrofit installations simple and fast. A supplied template assures fast and accurate hole cutting. The bracket slips behind the dry- wall and the screws secure the bracket to the frame, sandwiching the drywall
Wings areMounting Screws scored for
easy size trimming
IR Knockout
New Construction Wings instantly snap into the Bracket without screws
Frame slips into the bracket
The woofer, tweeter, crossover and the connection terminals are mounted to the Speaker Baffle
Grille
NILES NILES AUDIO CORPORATION
12331 S.W. 130 STREET MIAMI, FLORIDA 33186 ® TEL: (305)
www.nilesaudio.com
between them. The speaker baffle attach- es to the frame, and the grille mounts over the speaker.
Instant Speaker Changes
An MP or BG speaker can be substituted for the HD, if the frame size is identical (e.g.
Hole Saving Bracket
New Construction Wings allow the Bracket to be installed as a “Hole Saver” before the drywall goes up. The drywall contractor cuts the hole in the drywall as it is installed, reducing the chances of misplaced wire.
CEDIA
CUSTOM
ELECTRONIC
DESIGN &
INSTALLATION
ASSOCIATION
CHARTER MEMBER
©1999 Niles Audio Corporation. Note: Because Niles believes in constantly improving its products, Niles reserves the right to change product specifications without notice. Niles, the Niles logo and Blending High Fidelity and Architecture are registered trademarks of Niles Audio Corporation. Printed in USA DS00128A
