Niles Audio PAR4 manual Operation, Potential damage To components

S I M P L I F I E D I N F R A R E D R O U T E R

IMPORTANT
Make all final
connections to the
router before
connecting the
power supply.
This will avoid
potential damage
to components.	Figure 4

BE SURE TO OBSERVE PROPER POLARITY WHEN EXTENDING THE FLASHER WIRE.

The wire lead marked with a gray stripe is positive (+); the unmarked lead is negative (-).

Operation

Operating the PAR4 is a simple matter of selecting the appro- priate IR codes you need from a table of supplied code sets. See figure 5. The IR codes are available for download from the Niles Technical Support website:

	http://www.nilesaudio.com/techsupport
	1. On the Niles Technical Support website select the brand
	of remote control you will use to control the PAR4 (i.e.
	the Niles IntelliControl) and download the file for that
	remote control. After downloading the file you will need to
	import it into the programming software for the selected
	remote control.
	2. From the supplied table select the route you wish to
	use (i.e. code 1: all four routes on) and load it into the
	remote control.
	3. Test the code by operating the remote and observing the
	flasher LEDs on the PAR4. For example, if the “all on” com-
7	mand is issued, all four LEDs should illuminate indicating
	that all four routes are active.