INSTALLATION (CONTINUED)
2.For each loudspeaker, orient and tape the enclosed mounting template to the wall at the desired placement location, as shown in Figure 4. Use a level to verify tilt is zero. Be sure to account for any moldings that may interfere with the loudspeaker cabinet upon installation.
Bracket Template
Figure 4. The PHD mounting template is shown in horizontal and vertical positions (with TOP side up).
3.Follow the directions included on the template. Drill four small mounting holes at the designated locations noted on the template. If you also plan to run loudspeaker wire in the wall, you’ll need to create a cutout for it within the noted wire boundary (see Figure 4). When drilling is complete, remove each mounting template.
4.Use the stamped (TOP) label to orient each mounting bracket and run loudspeaker wire through its opening for later connection. Fasten each bracket to the wall with appropriate mounting hardware.
8
