Operation

B L E N D I N G H I G H F I D E L I T Y A N D A R C H I T E C T U R E ®

1. Make sure the amplifier or

receiver is OFF and set the

volume to minimum.

2. Set the SCW-1D volume

to maximum (fully clock-

wise).

3. If you are using a Niles

speaker selector system, locate

the ON/OFF button which

corresponds to the speaker

5. Slowly turn up the ampli-

fier or receiver volume and

set it to a comfortable (not

maximum) listening level.

Be careful not to overdrive

or “clip” your amplifier. If

the sound becomes muddy

or distorted, you have

reached the limit of your

amplifier’s volume capabili-

ty and should quickly

SCW-1D. If all the speaker pairs in your system are equipped with Niles volume controls, you can leave the amplifier or receiver volume set at one position and use the Niles controls exclusively.

7. You can turn off the

speakers by turning the

knob on the SCW-1D com-

SCW-1D

STEREO WALL-MOUNT VOLUME CONTROL

Introduction

pair you wish to play. Set it to

the ON position.

4. Turn on the amplifier or

receiver and select a source,

such as tuner or CD player.

reduce the volume to avoid

damaging your speakers.

6. Adjust the volume of the

speakers to the desired lis-

tening level by using the

pletely counter-clockwise, or

by pressing the ON/OFF

button on your speaker

selector.

The SCW-1D is a wall-mount, Decora® style speaker volume control. It connects between the speaker-level output of an amplifier, speaker selector, etc. and a pair of speakers. A perfect application for the SCW-1D is adjusting the volume of remotely located speakers.

The SCW-1D adjusts the volume of speakers connected to it by attenuating the amplifier signal. Niles volume controls use autoformers instead of L-pads for the volume controlling element. The autoformers assure minimal internal power dissipation with virtually no power wasted as heat.

Limited Warranty

Features and Benefits

Niles Audio Corporation (“NILES”) warrants its passive products (those not requiring AC or battery power) to the original purchaser to be free of manu- facturing defects in material and workmanship for a period of ten years from date of purchase.

This Warranty is subject to the following additional conditions and limitations. The Warranty is void and inapplicable if NILES deems that the product has been used or handled other than in accordance with the instructions provided by the manufacturer, including but not limited to damage caused by accident, mishandling, improper installation, abuse, negligence, or normal wear and tear, or any defect

If the above conditions are met, the purchaser’s sole remedy shall be to return the product to NILES, in which case NILES will repair or replace, at its sole option, the defective product without charge for parts or labor. NILES will return a unit repaired or replaced under warranty by shipping same by its usual shipping method from the factory (only) at its expense within the United States of America. THERE ARE NO OTHER WARRANTIES, INCLUDING WITHOUT LIMITATION, EITHER EXPRESS OR IMPLIED WARRANTIES OF MER- CHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, WITH RESPECT TO THE PRODUCT.

A 10-position control for a broad range of adjustment

Transformers made of the highest quality grain-oriented silicon steel to provide 20-20,000 Hz (± 2 dB) frequency response andsuperb power handling (60 watts)

Dual set-screw knob to prevent accidental removal

100% electrical and acoustical testing for frequency response, distortion, and power handling

10 year parts and labor warranty

Available in four designer colors

caused by repair to the product by anyone other than NILES or an authorized NILES dealer.

REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE

Specifications

To obtain warranty service, take the unit to the nearest authorized NILES dealer, who will test the product and if necessary, forward it to NILES for service. If there are no authorized NILES dealers in your area, you must write to NILES and include your name, model and serial number of your unit, along with a brief description of the problem. A fac- tory Return Authorization Number will be sent to you. DO NOT RETURN ANY UNIT WITHOUT FIRST RECEIVING WRITTEN AUTHORIZATION AND SHIPPING INSTRUCTIONS FROM NILES.

REMEDY OF THE CONSUMER/PURCHASER. NILES SHALL NOT BE RESPONSIBLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES EXCEPT TO THE EXTENT PROVIDED (OR PROHIB- ITED) BY APPLICABLE LAW.

Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation may not apply to you. This warran- ty gives you specific legal rights, and you may also have other rights which vary from state to state.

For the name of your nearest authorized NILES

Audio Power Handling

100 Watts/channel peak music power

60 Watts/channel continuous power

Mounting

In-wall, fits into most 18 cubic inch single- gang electrical boxes at least 2-3/4” deep, Decora-style faceplate

Wiring Requirements

Unit Dimensions

1-5/8" wide x 2-7/8" high

Face Plate Dimensions

Decora faceplate;

2-3/4” wide x 4-1/2” high

Depth Behind Plate

2-1/4”

dealer contact:

NILES AUDIO CORPORATION

P.O. BOX 160818, Miami, Florida 33116.

Individual runs of 2-conductor speaker wire, 14-22 gauge

Niles Audio Corporation 12331 S.W. 130 Street Miami, Florida 33186 Tel: (305) 238-4373 Fax: (305) 238-0185

Niles Audio Corporation

©1999 Niles Audio Corporation. All rights reserved. Niles, the Niles logo and Blending High Fidelity and Architecture are registered trademarks of Niles Audio Corporation. Decora is a registered trademark of Leviton Manufacturing Co., Inc. Because Niles continuously strives to improve its products, Niles reserves the right to change product specifications without notice. Printed in the USA 11/96 DS00172A

Page 1
Image 1
Niles Audio SCW-1D specifications Operation, Introduction, Limited Warranty Features and Benefits, Specifications

SCW-1D specifications

The Niles Audio SCW-1D is a cutting-edge in-wall speaker designed for audio enthusiasts seeking high-quality sound without compromising on aesthetics. With its innovative features and technology, the SCW-1D delivers an exceptional listening experience suitable for various applications, including home theaters, living rooms, and media rooms.

One of the standout characteristics of the SCW-1D is its advanced speaker design. The speaker is equipped with a 6.5-inch polypropylene woofer, which provides remarkable bass response and clarity. Complemented by a 1-inch pivoting dome tweeter, the SCW-1D offers an expanded frequency range, ensuring that high-frequency details are crisp and clear. This combination allows the speaker to deliver a well-balanced sound profile that can fill a room with rich audio.

The SCW-1D features Niles’ exclusive transformer technology, which enhances its efficiency and performance. This technology allows the speaker to achieve a higher output while requiring less power, making it an energy-efficient option for consumers. Additionally, the built-in impedance matching transformer means that the speaker can seamlessly integrate into multi-room audio systems without causing impedance issues.

Installation is a breeze with the SCW-1D, thanks to its user-friendly design. The speaker is equipped with an adjustable dog-leg mounting system that allows for easy placement within walls. This ensures that homeowners can enjoy a clean, professional installation without the need for extensive modifications to their existing structures. With a paintable magnetically attached grille, users can customize the appearance of the speaker to match their home decor seamlessly.

One of the key benefits of the SCW-1D is its versatility. Whether used for background music or as part of a high-end home theater system, this speaker is engineered to adapt to different audio environments. The SCW-1D is also compatible with various audio formats, making it a future-proof choice for tech-savvy consumers.

In summary, the Niles Audio SCW-1D combines high-quality sound with innovative technology and ease of installation, making it an ideal choice for homeowners looking to elevate their audio experience while maintaining an elegant aesthetic.