AC Power Plug
STEP
Plug the female IEC socket of | Just like a computer or printer, the |
the supplied AC cord into the IEC | has an AC cord which unplugs either at the |
receptacle on the rear of the amplifier. | amp or at the wall for your convenience. |
|
|
Plug the | If you use a grounded power strip, surge |
230V 50 Hz wall outlet. | suppressor or extension cord, verify that |
| proper ground is maintained. |
|
|
Caution! Typically the preamp/ | The |
receiver’s switched outlet | approximately 700 watts from an AC |
is not rated for a power | wall outlet. Use the auto turn on circuit |
amplifier. | instead. |
|
|
Installation
14