FRONT AND REAR PANEL DETAILS
Red “Power” LED confirms the amplifier is | Red “Active” LED lights when the ampli- |
connected to a live AC power outlet. (and | fier circuitry has been turned on by the |
that the master power switch is on). |
Front panel “Master Power” switch turns off the entire amplifier, including the
Main Inputs enable you to route a stereo line level source to the
3.5 Mini Plug socket for voltage input.
The red “Protect” LED indicates the amp has shut down because there is a fault in the speaker, the wiring, or with the
Cascade Outputs of the main input enable you to daisy chain multiple amplifiers.
3.5mm Mini Plug socket for 12v DC Control output.
9