Niles Audio TS120 manual Installation, Step by Step

Installation

Step by Step

1.The TS120 is a small free-standing box designed to sit on a shelf or other convenient surface. The unit can be mounted under a shelf using double-sided tape or Velcro® (not supplied).

2.Run the cable to the TS120. Label the cable for future reference.

3.Locate the connector on the TS120 and remove it.

4.Next, strip 1/4” of insulation from the end of each wire. Tightly twist the end of each wire until there are no frayed ends.

5.Use a small flathead screwdriver or your thumbnail to raise the locking tabs, exposing the holes on the removable connectors.

Figure 4 This color code is based on the industry standard T568A coding for the RJ45 connector. When connecting the TS120 to Niles MultiZone Keypads with an IR connection observe this pin configuration

NILES AUDIO CORPORATION – 1-800-BUY-HIFI – 1-305-238-4373 7