A-12 / ENGLISH

DETERGENT SYSTEM PREPARATION AND USE (ECOFLEX MODELS ONLY)

COMMON INSTRUCTIONS:

Pressing and releasing the Detergent Switch (J) while the solution system is active will cause the detergent system to alternately turn on and off. The system should be purged of previous detergent when switching to a different detergent. SERVICE NOTE: Move machine over floor drain before purging because a small amount of detergent will be dispensed in the process.

To Purge When Changing Chemicals:

1Disconnect and remove the detergent cartridge.

2Turn the Key Switch (A) ON. Press and hold the Solution Switch (F) and the Detergent Switch (J) down for 3 seconds. NOTE: Once activated the purge process takes 10 seconds. See illustration on next page for Detergent System indicators. Normally one purge cycle is adequate to purge the system.

To Purge Weekly:

1Disconnect and remove the detergent cartridge. Install and connect a Cartridge filled with clean water.

2Turn the Key Switch (A) ON. Press and hold Solution Switch (F) and the Detergent Switch (J) down for 3 seconds. NOTE: Once activated the purge

process takes 10 seconds. See illustration on next page for Detergent System indicators. Normally one purge cycle is adequate to purge the system.

Detergent Percentage:

1The detergent percentage default is 0.25%. To change the percentage, the detergent system must be OFF, then press and hold the Detergent ON/OFF Switch (J) for 2 seconds. The detergent indicator will flash and each press of the switch will cycle through the available percentages (3%, 2%, 1.5%, 1%, 0.8%, 0.66%, 0.5%, 0.4%, 0.3%., 0.25%). Once the desired percentage is displayed on the screen (K9), stop and it will lock in after 5 seconds.

CARTRIDGE INSTRUCTIONS:

The Detergent Cartridge (29) is located behind the Side Access Panel (27). Fill the detergent cartridge with a maximum of 2.2 gallons (8.32 Liters) of detergent. SERVICE NOTE: Remove the detergent cartridge from the detergent box prior to filling to avoid spilling detergent on the machine.

It is recommended that a separate cartridge be used for each detergent you plan to use. The detergent cartridges have a white decal on them so you can write the detergent name on each cartridge to avoid mixing them up. The system should be purged of previous detergent when switching to a different detergent. When installing a new cartridge, remove the Cap (AA) and place the cartridge in the detergent box. Install the Dry Break Cap (BB) and detergent hose as shown.

FIGURE 6

A-12- FORM NO. 56041978 - BR1100S / BR1300S

Page 11 Page 13
Page 12
Image 12
Nilfisk-Advance America BR1100S 12 / English, Detergent System Preparation and USE Ecoflex Models only, To Purge Weekly
Page 11 Page 13

BR1100S specifications

The Nilfisk-Advance America BR1100S is a state-of-the-art, battery-powered floor scrubber that stands out for its exceptional performance, user-friendly design, and remarkable efficiency. Ideal for a variety of commercial applications, such as retail spaces, warehouses, and educational institutions, the BR1100S is engineered to provide unparalleled cleaning results while minimizing downtime.

One of the main features of the BR1100S is its compact design, which allows for easy maneuverability in tight spaces. With its slender profile, the scrubber can effortlessly navigate around obstacles, ensuring that no corner is left uncleaned. The machine is equipped with a scrub deck that features a width of 20 inches, making it suitable for medium-sized areas and ensuring quick coverage within stipulated cleaning times.

The BR1100S utilizes advanced lithium-ion battery technology, which provides up to 2.5 hours of continuous cleaning on a single charge. This ensures that cleaning tasks can be completed without interruptions, drastically enhancing productivity. The included charger allows for rapid recharging, further minimizing downtime.

Another key characteristic is the brush system, which employs a dual brush setup that enhances scrubbing efficiency. The scrubbing mechanism is designed to tackle tough dirt and grime while being gentle on the floor surface. Users have the option to select different brush pressure settings based on specific cleaning requirements, providing flexibility for various floor types.

Moreover, the BR1100S is equipped with automatic water control technology, allowing for optimal water usage. This smart system adjusts the water flow based on the cleaning speed, ensuring that floors are cleaned thoroughly without excess water wastage. Additionally, the machine features a simple and intuitive control panel, making it accessible for users of all experience levels.

Maintenance is also a breeze with the BR1100S. The removable recovery tank allows for easy disposal of used water, while the brushes can be changed with minimal effort. Coupled with a durable construction, this scrubber is designed to withstand heavy use, offering longevity and reliability.

In summary, the Nilfisk-Advance America BR1100S is a robust and efficient choice for floor cleaning. With its combination of innovative technology, user-friendly design, and impressive performance, it is a fantastic investment for businesses looking to maintain immaculate spaces.
Top Page Image Contents