Assembly
1.UZ 877- The ends of the handle are inserted into the holes in the base and secured by two socket head capscrews from below. The container is than placed on the base as in figure 1.
UZ 878- The container is placed on the base as in figure 2.
2.The motor housing is placed on the container and secured with snapfasteners.
3.The hose is connected to the container via the inlet stub. Pull up the locking pin and insert the hose end. Then fit the extension tubes and nozzle as shown in figure 3.
The hooks on top of the motor housing are for carrying the hose and the power cable.
6
