1110
After work
Switch the vacuum cleaner off and unplug the
power cord.
Tug the power cord and let go. The power cord then
winds itself up automatically.
On vacuum cleaners with an electronically operated
power cord reel, the power cord is automatically
wound up when you pull the plug out of the wall
socket.
If you want to stop the cord from rewinding
completely (e.g. when moving the plug), you can tug
on the cord to stop it from rewinding.
You can activate or deactivate the power cord
brake by pulling or tugging the power cord.
When you stop cleaning for a moment, you can use
the parking aid at the back of the vacuum cleaner.
Switch the electric brush to »OFF« mode first.
Slide the plastic tab on the nozzle connector into the
groove at the back of the vacuum cleaner.
The vacuum cleaner will switch itself off.
Vacuuming with accessories
Pull the 4-in-1 accessory in the direction of the arrow
to remove it from the accessory holder.
a)Crevice nozzle
For vacuuming in crevices and corners. For difficult
to get to places, the 4-in-1 accessory can be
extended in two stages to 14 inches (or 360 mm)
by pulling out the crevice nozzle.
Extend the crevice nozzle to the second stop until
you can hear it engage.
To push the crevice nozzle together again, release
the telescope lock (by pressing in arrow direction).
b)Upholstery nozzle
For cleaning upholstery, curtains, etc.
c)Furniture brush
For window frames, cabinets, lamp shades etc.
Fold the upholstery nozzle over in the direction of
the arrow.
To extend the brush ring, turn in the direction of
the arrow.
Before replacing the 4-in-1 accessory in the
accessory holder, retract the bush ring and fold
the upholstery nozzle back.
!Caution: to prevent damage to the nozzle / furniture
brush, fold the upholstery nozzle out only when the
furniture brush is retracted.
CLICK!
CLICK!
a
b
c