Nilfisk C 105.5 / C 115.3
EN 3 Before you start using your pressure washer
3.1Mounting of trolley handle (C 115.3)
1.Place the trolley handle on the machine.
2.Secure the handle by mount- ing the 2 screws. Use the enclosed hexagon key.
3.2Mounting of quick coupling
1.Screw the quick coupling tight on to the water inlet (2).
Note: The inlet fi lter (2a) must always be fi tted
in the water inlet pipe to filter out
sand, limestone and
other impurities as these will damage the pump valves.
Caution: Failure to fi t the fi lter will invalidate the guarantee.
3.3Mounting of high pressu- re hose on spray handle
1. Attach the high pressure hose (4) to the spray handle
(7).
Detach the high pressure hose by pressing the pawl
(A).
A
6
