Water connection, Min m and max m will

Note: The spray lance (6) has a built-in low

pressure nozzle that can be used for ﬂ ushing away dirt.

2. Attach the nozzle.

,Warning: When attaching the Click

& Clean nozzles, the pawl on the

side of the spray lance should come out again.

Note: The Tor- nado® PR noz- zle and the foam

sprayer feature a swivel lock, which must be positioned in the hole in the Click & Clean spray lance.

Press the pawl to detach the Click & Clean nozzle.

NOTE: Connec- tion to the public mains according to regulations.

IMPORTANT! Only use water without any

impurities. If there is a risk of running sands in the inlet water (i.e. from your own well), an additional ﬁ lter should be mounted.

1.Let the water run through the water hose before connecting it to the machine to prevent sand and dirt from penetrat- ing the machine.

Note: Check that the ﬁ lter is ﬁ tted in the water inlet pipe and that it is not clogged up.

2.Connect the water hose to the water supply by means of the quick connector (inlet water, max. pressure: 10 bar, max. temperature: 40°C).

3.Turn on the water.