English / A-13, Solution Control | Nilfisk-ALTO CR 1500 specs

ENGLISH / A-13

OPERATIONS OF CONTROLS AND GAUGES

HOPPER LIFT - (VARIABLE MACHINES ONLY)

The Hopper Lift Lever (AF) is located to the left of the steering wheel on the left side of the driver compartment. This lever, which is marked “HOPPER”, raises and lowers the debris hopper to ease unloading.

WARNING

The hopper may drop unexpectedly and cause injury, always engage the safety arm before working under the hopper.

HOPPER SAFETY LOCK ARM (VARIABLE DUMP ONLY)

WARNING

When the hopper is raised the safety arm must be engaged before any work is done under the hopper

The Hopper Safety Lock Arm is located under the hopper assembly. After the work is complete, the safety arm must be disengaged.

HOPPER DUMP DOOR - (VARIABLE DUMP MACHINES ONLY)

The Hopper Dump Door Lever (AE) is located to the left of the steering wheel on the left of the driver compartment. This lever opens and closes the hopper door. This lever is located below the Hopper Lift Door and is marked “DUMP DOOR”.

SOLUTION CONTROL

To apply solution to the scrubbing brushes, push the Solution Control Lever (X) forward until the desired setting is reached. The solution rate is continuously variable from off to approximately 1-3/4 GPM at low and 3-1/2 GPM at high. To stop application of solution, pull back on the lever until it stops at the “off” position. The solution warning light will illuminate when the solution tank is empty, marking the end of the scrubbing cycle.

FIGURE 7

NOTE

For best results, discontinue application of solution 10 feet

before stopping or making a 90° or 180° turn.

SWEEPING BROOM LIFT CONTROL

The Main Broom Lift Control (Y) is located to the left of the driver seat. To lower the main broom, grasp the lever and pull back to clear the locking notch. Move the lever forward to the ﬁrst or second notch in the elongated slot. The ﬁrst notch, “SWEEP”, is for normal sweeping (2 to 3 inch [5 to 8 cm.] broom pattern). The second notch, “FLOAT”, is for heavy sweeping (4 to 5 inch [10 to 13 cm.] broom pattern).

To raise the main broom, pull the lever back and slide into the locking notch. You may operate the main broom in either the “SWEEP” or “FLOAT” position. However, the “SWEEP” position should be used for normal sweeping and will result in increased broom life. The

“FLOAT” position should be used only when sweeping extremelyY uneven areas.

NOTE - (Variable Dump Machines Only)

A switch triggered by the hopper and dump door position controls the sweeping functions, main broom, side broom, dust control, and ﬁlter shaker. The hopper must be down and the dump door open before these functions will work.

AE X

FORM NO. - 56041719 - CR 1500 - A-13

CR 1500 specifications

The Nilfisk-ALTO CR 1500 is a state-of-the-art cleaning machine that epitomizes efficiency and innovation, making it an ideal solution for both industrial and commercial cleaning applications. Designed to meet the rigorous demands of various environments, this model stands out with its powerful performance and user-friendly features.

One of the key features of the CR 1500 is its robust design, which allows it to handle heavy-duty tasks with ease. The machine is equipped with a reliable motor that ensures consistent power output, enabling it to tackle even the toughest cleaning jobs. With a high pressure and a flow rate that can be adjusted according to specific cleaning requirements, the CR 1500 guarantees optimal results every time.

The CR 1500 also integrates advanced technology, which enhances its operational efficiency. Its innovative EcoMode function significantly reduces both energy consumption and water usage without compromising cleaning performance. This environmentally friendly feature not only lowers operational costs but also supports sustainability initiatives, making it a smart choice for businesses aiming to reduce their ecological footprint.

Another noteworthy characteristic of the Nilfisk-ALTO CR 1500 is its user-centric design. The machine is equipped with ergonomic handles and intuitive controls, allowing for effortless maneuverability. The compact size of the unit ensures that it can easily navigate tight spaces while providing users with maximum comfort during extended cleaning sessions.

In addition to its main cleaning capabilities, the CR 1500 is versatile, equipped with various accessories and attachments that enable it to perform multiple tasks. This adaptability makes it suitable for a wide range of applications, including car washes, outdoor cleaning, and industrial facilities. The ease of changing accessories further enhances its usability, ensuring that it can quickly be tailored to the task at hand.

Durability is also a hallmark of the Nilfisk-ALTO CR 1500. Constructed with high-quality materials, this cleaning machine is built to last, even under harsh conditions. Regular maintenance is simplified through accessible components, ensuring that downtime is minimized and productivity is maximized.

In summary, the Nilfisk-ALTO CR 1500 combines powerful performance with innovative technology and a user-friendly design. Its eco-friendly features, versatility, and durability make it an exceptional choice for anyone in need of a reliable cleaning solution. Whether used in a commercial or industrial setting, the CR 1500 delivers results that not only meet but often exceed expectations.

Nilfisk-ALTO CR 1500 English / A-13, Hopper Safety Lock ARM Variable Dump only, Solution Control

Models: CR 1500