3.3Mounting of quick coupling
3.4Mounting of high pressure hose
1.Screw the quick coupling (16) tight on to the water inlet (2).
Note: The inlet fi lter must al- ways be fi tted in the water inlet pipe to fi lter out sand, limestone and other impurities as these will damage the pump valves.
Caution: Failure to fi t the fi lter will invalidate the guarantee.
Attach the high pressure hose
(4) to the spray gun (7).
De h the high pressure hose by pressing the pawl (A).
4 Operating your pressure washer
4.1Connection of high pressure hose (models without hose reel)
1.Mount the high pressure hose on the outlet (3).
6
